The DOI matches its Crossref record.
Stove Performance and Emission Characteristics in Residential Wood Log and Pellet Combustion, Part 2: Wood Stove
Abstract
The characteristics and quantities of a large number of gaseous and particulate emission components during combustion in a residential wood log stove with variations in fuel, appliance and operational conditions were determined experimentally. The measurement campaign included CO, NO x, organic gaseous carbon (OGC), volatile organic compounds (VOCs), polycyclic aromatic hydrocarbons (PAHs), total particulate matter (PM tot ) as well as particle mass and number concentrations, size distributions, and inorganic composition. CO varied in the range of 1100 to 7200 mg/MJ fuel, while OGC varied from 210 to 3300 mg/MJ fuel . Dominating VOCs were methane, followed by ethene, acetylene, and benzene. Methane varied from 9 to 1600 mg/MJ fuel . The nonmethane volatile organic compound (NMVOC) emissions were in the range of 20−2300 mg/MJ fuel . The PAH tot emissions varied from 1.3 to 220 mg/MJ fuel, in most cases dominated by phenantrene, fluoranthene, and pyrene. PM tot were in all cases dominated by fine particles and varied in the range 38−350 mg/MJ fuel . The mass median particle diameters and the peak mobility diameters of the fine particles varied in the range 200−320 and 220−330 nm, respectively, and number concentrations in the range of 1−4 × 10 13 particles/MJ fuel . Air starved conditions, at high firing intensity, gave the highest emissions, especially for hydrocarbons. This type of condition is seldom considered, though it may occur occasionally. The emissions from Swedish wood stoves, comparing a Swedish field study, are covered fairly well with the applied methodology, but other field studies report considerably higher emissions especially for diluted particle sampling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Global anthropogenic emissions of particulate matter including black carbon
Klimont, Z., Kupiainen, K., Heyes, C., Purohit, P., Cofala, J., Rafaj, P., Borken-Kleefeld, J., & Schöpp, W. (2017) · Atmospheric Chemistry and Physics · doi:10.5194/acp-17-8681-2017 · Cited by 878
Stohl, A., Klimont, Z., Eckhardt, S., Kupiainen, K., Shevchenko, V. P., Kopeikin, V. M., & Novigatsky, A. N. (2013) · Atmospheric Chemistry and Physics · doi:10.5194/acp-13-8833-2013 · Cited by 383
An overview of particulate emissions from residential biomass combustion
Vicente, E. D., & Alves, C. A. (2018) · Atmospheric Research · doi:10.1016/j.atmosres.2017.08.027 · Cited by 339
Health impacts of anthropogenic biomass burning in the developed world
Sigsgaard, T., Forsberg, B., Annesi-Maesano, I., Blomberg, A., Bølling, A., Boman, C., Bønløkke, J., Brauer, M., Bruce, N., Héroux, M.-E., et al. (2015) · European Respiratory Journal · doi:10.1183/13993003.01865-2014 · Cited by 266
Self-citationBiomass pellets for power generation in India: a techno-economic evaluation
Purohit, P., & Chaturvedi, V. (2018) · Environmental Science and Pollution Research · doi:10.1007/s11356-018-2960-8 · Cited by 130
Metadata
- Authors
- Pettersson, E., Boman, C., Westerholm, R., Boström, D., & Nordin, A.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-01-05
- Volume
- 25
- Issue
- 1
- Pages
- 315-323
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2000760449
- Cited by
- 197
- References
- 0
- FWCI
- 17.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.