Separation of Produced Emulsions from Surfactant Enhanced Oil Recovery Processes
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Selected cationic and amphoteric surfactants were effective in separating oil-in-water emulsions representative of produced emulsions expected during a surfactant/polymer (SP) process for enhanced oil recovery. The aqueous phase of the emulsion contained an anionic surfactant blend, alcohol, and partially hydrolyzed polyacrylamide. Brine composition was a suitable mixture of formation brine with brines from the surfactant slug and polymer drive. The crude oil had an American Petroleum Institute (API) gravity of 31°. Bottle tests were conducted at ambient temperature, which is near the reservoir temperature. Conventional non-ionic demulsifier resins and polymeric cationic flocculants were not effective in removing oil from the aqueous phase. The water content of the oil phase was still well above specification upon heating the emulsions to 50−60 °C. However, both oil and water phases of acceptable quality were obtained after 6 h of settling upon the addition of 200 ppm of octyltrimethylammonium bromide (C 8 TAB) at ambient temperature. Additionally, a commercial cationic surfactant at the same concentration yielded acceptable results for both phases in 2 h. Optical microscopy showed significant coalescence after only 1 min in the C 8 TAB system as the cationic surfactant reduced electrostatic repulsion among drops and shifted system phase behavior toward the balanced state between hydrophilic and lipophilic effects, actions well-known to reduce emulsion stability. Some amphoteric surfactants, such as cocobetaine, were also effective in separating these emulsions. The amount of cationic surfactant required could be reduced by adding it simultaneously with a non-ionic demulsifier resin. A commercial cationic surfactant was also found to significantly improve separation of emulsions produced during an alkaline/surfactant/polymer (ASP) process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Our current understanding of water-in-crude oil emulsions.
Sjöblom, J., Aske, N., Harald Auflem, I., Brandal, Ø., Erik Havre, T., Sæther, Ø., Westvik, A., Eng Johnsen, E., & Kallevik, H. (2003) · Advances in Colloid and Interface Science · doi:10.1016/s0001-8686(02)00066-0 · Cited by 476
Chemically Induced Destabilization of Water-in-Crude Oil Emulsions
Peña, A. A., Hirasaki, G. J., & Miller, C. A. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049666i · Cited by 143
Self-citationDemulsification of Crude Oil Emulsions: Correlation to Microemulsion Phase Behavior
Goldszal, A., & Bourrel, M. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990922e · Cited by 132
Cited by
Demulsification techniques of water-in-oil and oil-in-water emulsions in petroleum industry
Zolfaghari, R., Fakhru’l-Razi, A., Abdullah, L. C., Elnashaie, S. S. E. H., & Pendashteh, A. (2016) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.06.026 · Cited by 733
Overview on petroleum emulsions, formation, influence and demulsification treatment techniques
Abdulredha, M. M., Siti Aslina, H., & Luqman, C. A. (2020) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2018.11.014 · Cited by 302
Grenoble, Z., & Trabelsi, S. (2018) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2018.08.003 · Cited by 120
Chemical Interactions and Demulsifier Characteristics for Enhanced Oil Recovery Applications
Nguyen, D., Sadeghi, N., & Houston, C. (2012) · Energy & Fuels · doi:10.1021/ef201800b · Cited by 90
Self-citation
Metadata
- Authors
- Hirasaki, G. J., Miller, C. A., Raney, O. G., Poindexter, M. K., Nguyen, D. T., & Hera, J.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-11-10
- Volume
- 25
- Issue
- 2
- Pages
- 555-561
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2040415357
- Cited by
- 112
- References
- 3
- FWCI
- 6.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.