Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 195

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Fractional Condensation of Biomass Pyrolysis Vapors

Open access
Westerhof, Roel J. M., Brilman, D. Wim F., Garcia-Perez, Manuel, Wang, Zhouhong, Oudenhoven, Stijn R. G., van Swaaij, Wim P. M., Kersten, Sascha R. A.·2011·Energy & Fuels

Abstract

In this paper, we have investigated the possibilities to steer the composition and, thus, the quality of pyrolysis liquids by the reactor temperature and the pyrolysis vapor condenser temperature. Pine wood was pyrolyzed in a 1 kg/h fluidized-bed pyrolysis reactor operated at 330 or 480 °C. The pyrolysis vapors produced were condensed using a condenser train of two counter-current spray columns arranged in series. In this paper, the temperature of the first condenser was varied between 20 and 115 °C, while the second condenser temperature was kept at 20 °C. To describe the composition of the oils, we have integrated several analytical techniques into a novel characterization scheme that can account for 77−82 wt % of the oils. The effects of the condensation conditions on fractions of light compounds in the oils can be predicted with a simple equilibrium stage condensation model. It has been observed that pyrolysis at 330 °C gives a light oil with a low amount of mid-boilers [normal boiling point (nbp) of 150−300 °C] and heavy compounds (water insolubles and mono- and oligosugars). Sugars, mid-boilers, and water-insoluble lignin-derived oligomers are more present in the oil obtained at 480 °C, while the yields of light organics are approximately the same for 330 and 480 °C. It can be concluded that fractional condensation is a promising cheap downstream approach to concentrate compounds (classes) and, thus, to control the quality of pyrolysis oils. For instance, operating the first condenser around 70−90 °C gives an aqueous liquid in the second condenser containing 40 wt % light organics, which are interesting for extraction (e.g., 10 wt % acetic acid) and supercritical water gasification to produce hydrogen. Under these conditions, the oils from the first condenser have a high content of sugars (20 wt %) and lignin-derived oligomers (40 wt %), which are attractive fractions for fermentation/sugar chemistry and gasoline production via fluidized catalytic cracking (FCC)/hydrotreatment, respectively.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ef2000322

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 2 references

Cited by

See all 195

Metadata

Authors
Westerhof, R. J. M., Brilman, D. W. F., Garcia-Perez, M., Wang, Z., Oudenhoven, S. R. G., van Swaaij, W. P. M., & Kersten, S. R. A.
Venue
Energy & Fuels
Published
2011-04-04
Volume
25
Issue
4
Pages
1817-1829
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2167183762
Cited by
195
References
2
FWCI
6.38
Type
journal article
Language
en
Open access
green

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Fractional Condensation of Biomass Pyrolysis Vapors. https://app.cochat.ai/papers/10.1021/ef2000322
The paper
Westerhof, R. J. M., Brilman, D. W. F., Garcia-Perez, M., Wang, Z., Oudenhoven, S. R. G., van Swaaij, W. P. M., & Kersten, S. R. A. (2011). Fractional Condensation of Biomass Pyrolysis Vapors. Energy & Fuels. https://doi.org/10.1021/ef2000322

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.