Catalytic Fast Pyrolysis of White Oak Wood in a Bubbling Fluidized Bed
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Catalytic fast pyrolysis was performed on white oak wood using two zeolite-type catalysts as bed material in a bubbling fluidized bed reactor. The two catalysts chosen, on the basis of a previous screening study, were Ca 2+ exchanged Y zeolite and a proprietary β-zeolite type catalyst (catalyst M) both supplied by UOP. Each catalyst proved effective at partially deoxygenating the oak wood pyrolysis vapors during the initial pyrolysis process and adding aromatic hydrocarbons to the liquid product mixture. However, each incurred a penalty of reduced liquid yield and catalyst deactivation due to coke formation on the catalysts’ surfaces. The coking on the Ca–Y zeolite catalyst was relatively less severe because the deoxygenation process followed decarbonylation and decarboxylation reaction pathways more compared to the dehydration and dehydrogenation pathways for catalyst M, although evidence that both catalysts were active for all the reaction mechanisms exists. The severe coking problem on catalyst M on catalyst activity was mitigated by successfully regenerating the catalyst in situ, resulting in effective production of partially deoxygenated pyrolysis oils over extended periods of time and concomitantly improving the C/O ratio of the upgraded pyrolysis oils from 1.8/1 to 5.9/1 at best. However, the severe coking does limit the overall carbon conversation efficiency from biomass to catalytic pyrolysis oil. Nonetheless, this demonstrates the potential of producing partially deoxygenated and stable fuel intermediates by in situ catalytic fast pyrolysis for ready use as refinery fuel blendstock using the bubbling fluidized bed technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Influence of inorganic salts on the primary pyrolysis products of cellulose
Patwardhan, P. R., Satrio, J. A., Brown, R. C., & Shanks, B. H. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.01.112 · Cited by 799
The effect of lignin and inorganic species in biomass on pyrolysis oil yields, quality and stability
Fahmi, R., Bridgwater, A. V., Donnison, I., Yates, N., & Jones, J. M. (2008) · Fuel · doi:10.1016/j.fuel.2007.07.026 · Cited by 541
Chemical Composition of Bio-oils Produced by Fast Pyrolysis of Two Energy Crops
Mullen, C. A., & Boateng, A. A. (2008) · Energy & Fuels · doi:10.1021/ef700776w · Cited by 369
Self-citation
Cited by
Catalytic fast pyrolysis of lignocellulosic biomass
Liu, C., Wang, H., Karim, A. M., Sun, J., & Wang, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60414d · Cited by 1,117
Recent Advances in Hydrotreating of Pyrolysis Bio-Oil and Its Oxygen-Containing Model Compounds
Wang, H., Male, J., & Wang, Y. (2013) · ACS Catalysis · doi:10.1021/cs400069z · Cited by 714
Sharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N., Murthy Konda, N. V. S. N., Garcia, M. C., Wang, L., Hallett, J., & Shah, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.10.006 · Cited by 473
Qiu, B., Tao, X., Wang, J., Liu, Y., Li, S., & Chu, H. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115647 · Cited by 314
Catalytic fast pyrolysis of aspen lignin via Py-GC/MS
Zhang, M., Resende, F. L. P., & Moutsoglou, A. (2014) · Fuel · doi:10.1016/j.fuel.2013.07.128 · Cited by 159
Metadata
- Authors
- Mullen, C. A., Boateng, A. A., Mihalcik, D. J., & Goldberg, N. M.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-11-08
- Volume
- 25
- Issue
- 11
- Pages
- 5444-5451
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2335669169
- Cited by
- 135
- References
- 4
- FWCI
- 6.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.