Analysis of Oxygenated Compounds in Hydrotreated Biomass Fast Pyrolysis Oil Distillate Fractions
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Three hydrotreated bio-oils with different oxygen contents (8.2, 4.9, and 0.4 w/w) were distilled to produce light, naphtha, jet, diesel, and gas oil boiling range fractions that were characterized for oxygen-containing species by a variety of analytical methods. The bio-oils were originally generated from lignocellulosic biomass in an entrained-flow fast pyrolysis reactor. Analyses included elemental composition, carbon type distribution by 13 C nuclear magnetic resonance, acid number, gas chromatography/mass spectroscopy, volatile organic acids by liquid chromatography, and carbonyl compounds by 2,4-dinitrophenylhydrazine derivatization and liquid chromatography. Acid number titrations employed an improved titrant–electrode combination with faster response that allowed the detection of multiple end points in many samples and allowed for acid values attributable to carboxylic acids and to phenols to be distinguished. The results of these analyses showed that the highest oxygen content bio-oil fractions contained oxygen as carboxylic acids, carbonyls, aryl ethers, phenols, and alcohols. Carboxylic acids and carbonyl compounds detected in this sample were concentrated in the light, naphtha, and jet fractions (<260 °C boiling point). The carboxylic acid content of all of the high oxygen content fractions was likely too high for these materials to be considered as fuel blendstocks, although the potential for blending with crude oil or refinery intermediate streams may exist for the diesel and gas oil fractions. The 4.9% oxygen sample contained, almost exclusively, phenolic compounds found to be present throughout the boiling range fractions, which imparted measurable acidity primarily in the light, naphtha, and jet fractions. Additional study is required to understand what levels of the weakly acidic phenols could be tolerated in a refinery feedstock. The diesel and gas oil fractions from this upgraded oil had low acidity but still contained 3–4 wt % oxygen present as phenols that could not be specifically identified. These materials appear to have excellent potential as refinery feedstocks and some potential for blending into finished fuels. Fractions from the lowest oxygen-content oil exhibited some phenolic acidity but generally contained very low levels of oxygen functional groups. These materials would likely be suitable as refinery feedstocks and potentially as fuel blend components. Paraffins, isoparaffins, olefins, naphthenes, and aromatics (PIONA) analysis of the light and naphtha fractions showed benzene contents of 0.5 and 0.4 vol % and predicted (research octane number (RON) + motor octane number (MON))/2 of 63 and 70, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Cited by
A review and perspective of recent bio-oil hydrotreating research
Zacher, A. H., Olarte, M. V., Santosa, D. M., Elliott, D. C., & Jones, S. B. (2014) · Green Chem. · doi:10.1039/c3gc41382a · Cited by 528
Self-citationSharifzadeh, M., Sadeqzadeh, M., Guo, M., Borhani, T. N., Murthy Konda, N. V. S. N., Garcia, M. C., Wang, L., Hallett, J., & Shah, N. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.10.006 · Cited by 473
Catalytic Reforming of Oxygenates: State of the Art and Future Prospects
Li, D., Li, X., & Gong, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00099 · Cited by 350
Technical review on jet fuel production
Liu, G., Yan, B., & Chen, G. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.03.025 · Cited by 299
Hydroprocessing challenges in biofuels production
Furimsky, E. (2013) · Catalysis Today · doi:10.1016/j.cattod.2012.11.008 · Cited by 284
Metadata
- Authors
- Christensen, E. D., Chupka, G. M., Luecke, J., Smurthwaite, T., Alleman, T. L., Iisa, K., Franz, J. A., Elliott, D. C., & McCormick, R. L.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-10-19
- Volume
- 25
- Issue
- 11
- Pages
- 5462-5471
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2077726882
- Cited by
- 137
- References
- 1
- FWCI
- 5.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Analysis of Oxygenated Compounds in Hydrotreated Biomass Fast Pyrolysis Oil Distillate Fractions. https://app.cochat.ai/papers/10.1021/ef201357h
- The paper
- Christensen, E. D., Chupka, G. M., Luecke, J., Smurthwaite, T., Alleman, T. L., Iisa, K., Franz, J. A., Elliott, D. C., & McCormick, R. L. (2011). Analysis of Oxygenated Compounds in Hydrotreated Biomass Fast Pyrolysis Oil Distillate Fractions. Energy & Fuels. https://doi.org/10.1021/ef201357h
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.