CoChat

Investigation of Porous Silica Supported Mixed-Amine Sorbents for Post-Combustion CO2 Capture

Fauth, D. J., Gray, M. L., Pennline, H. W., Krutka, H. M., Sjostrom, S., Ault, A. M. · 2012 · Energy & Fuels
Cited by 143

The DOI matches its Crossref record.

Abstract

Prospective post-combustion CO 2 capture sorbents were prepared by the immobilization of a low-molecular-weight, branched polyethyleneimine (PEI) and 3-(aminopropyl)triethoxysilane (APTES) within a commercially available porous PQ Corporation CS-2129 silica support to investigate (i) CO 2 adsorption properties of the supported mixed-amine (PEI+APTES) sorbents in both pure CO 2 environments and simulated flue gas conditions, (ii) their thermal and hydrolytic stability over numerous adsorption and desorption cycles, and (iii) their equilibrium and kinetic adsorption behavior. Initial CO 2 adsorption–desorption measurements via thermogravimetric analysis (TGA) were conducted in pure CO 2 to measure dry, near-equilibrium CO 2 adsorption capacities, together in calculating amine efficiencies, which was recognized in being a meaningful criterion in evaluating sorbent performance for selecting the “most favorable” mixed-amine (PEI+APTES) composition. The as-prepared materials containing various weight ratios of PEI to APTES showed less uptake of CO 2, relative to the supported PEI-only impregnated material under investigated TGA experimental conditions. Nitrogen adsorption–desorption isotherms in evaluating the physical properties of the synthesized mixed-amine (PEI+APTES) samples showed reduced values specific to surface area, and total pore volume largely predictable from the successful incorporation of PEI multilayers into the structure of the porous silica matrix, together with unreacted APTES moieties remaining behind after material synthesis. Breakthrough curves produced by (PEI-15-APTES-35)-PQCS2129, (PEI-25-APTES-25)-PQCS2129, (PEI-35-APTES-15)-PQCS2129, and (PEI-50)-PQCS2129 showed mean near-equilibrium CO 2 adsorption capacities of 1.81 ± 0.17, 2.43 ± 0.26, 2.44 ± 0.19, and 2.44 ± 0.45 mol CO 2 /kg of sorbent, respectively, over multiple CO 2 adsorption–desorption cycles utilizing a 10% CO 2, 8% H 2 O (balance, He stream) at 60 °C and 1.01 bar for adsorption; followed by regeneration in a He stream containing 90 vol% water vapor at 105 °C. From these studies, (PEI-25-APTES-25)-PQCS2129 and (PEI-35-APTES-15)-PQCS2129 exhibited a higher CO 2 capturing efficiency (absorbed amount of CO 2 per gram of PEI), relative to (PEI-50)-PQCS2129, indicating the PEI/APTES interface (i.e., interaction between layers of surface alkyl chains associated with APTES and PEI) is perhaps contributing to improving the deposition/dispersion of PEI, thereby decreasing the diffusion resistance with regard to CO 2 entering into the bulk of the PEI multilayers. Conversely, the lower amine efficiency of (PEI-50)-PQCS2129 can be ascribed to the possible clustering of the PEI molecules from the higher PEI loading, resulting in a decrease of accessible amine sites and creating a higher diffusional resistance in connection with CO 2 molecules penetrating into the majority of layers of PEI. Near-equilibrium CO 2 adsorption measurements of (PEI-25-APTES-25)-PQCS2129 in utilizing the laboratory-scale, fixed-bed flow reactor system located at ADA-ES (Littleton, CO) displayed ranges of 2.70–3.45 mol CO 2 /kg sorbent at 40 °C under different CO 2 partial pressures. The (PEI-25-APTES-25)-PQCS2129 material showed a relatively stable performance over many adsorption–desorption cycles (i.e., >250 cycles) under humidified simulated flue gas conditions, along with a higher amine efficiency relative to the (PEI-50)-PQCS2129 sample (“PEI-only” sample). In fitting the experimental data of ADA-ES, the Langmuir isotherm model was determined to be an acceptable representation of the observed thermodynamics.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ef201578a

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 143

Metadata

Authors
Fauth, D. J., Gray, M. L., Pennline, H. W., Krutka, H. M., Sjostrom, S., & Ault, A. M.
Venue
Energy & Fuels
Published
2012-04-05
Volume
26
Issue
4
Pages
2483-2496
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2321430700
Cited by
143
References
0
FWCI
23.52
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Investigation of Porous Silica Supported Mixed-Amine Sorbents for Post-Combustion CO2 Capture. https://app.cochat.ai/papers/10.1021/ef201578a
The paper
Fauth, D. J., Gray, M. L., Pennline, H. W., Krutka, H. M., Sjostrom, S., & Ault, A. M. (2012). Investigation of Porous Silica Supported Mixed-Amine Sorbents for Post-Combustion CO2 Capture. Energy & Fuels. https://doi.org/10.1021/ef201578a

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.