CoChat

Mechanistic Investigation into Bed Agglomeration during Biomass Fast Pyrolysis in a Fluidized-Bed Reactor

Burton, Alan, Wu, Hongwei · 2012 · Energy & Fuels
Cited by 29

The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.

Abstract

This paper demonstrates that during the pyrolysis of mallee leaf (355–500 μm) in a fluidized-bed reactor (bed materials: silica sand, 125–355 μm) at 300–700 °C, bed agglomeration takes place due to the formation of char–char and/or char–sand agglomerates connected by carbon-enriched necks. There are two types of bed agglomeration: one formed due to solvent-soluble organic matter which dissembles upon solvent washing and the other due to solvent-insoluble organic matter produced from biomass pyrolysis. The yield of each type of bed agglomeration is broadly proportional to the yield of the corresponding type of organic matter in the bed samples. The total yield of bed agglomeration decreases with increasing pyrolysis temperature, from 16.5% at 300 °C to 9.5% at 500 °C and 1.8% at 700 °C. The distribution of the two types of bed agglomeration is also strongly temperature dependent. At low temperatures (e.g., 300 °C), bed agglomeration is dominantly contributed by those formed by solvent-insoluble organic matter. As pyrolysis temperature increases, bed agglomeration due to solvent-soluble organic matter becomes increasingly important and reaches a maximum at 500 °C. At pyrolysis temperatures above 600 °C, there is a drastic reduction in the bed agglomeration formed by solvent-soluble organic matter due to thermal cracking so that bed agglomeration is again dominantly formed by solvent-insoluble organic matter. Overall, bed agglomeration during biomass pyrolysis in a fluidized-bed reactor is due to the production of sticky agents, including both partially molten pyrolyzing biomass particles and the organic matter (both solvent- soluble and -insoluble) produced from biomass pyrolysis reactions.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ef300406k

Cites

3 of 3 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 29

Metadata

Authors
Burton, A., & Wu, H.
Venue
Energy & Fuels
Published
2012-10-17
Volume
26
Issue
11
Pages
6979-6987
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2032550931
Cited by
29
References
3
FWCI
1.74
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.