The DOI matches its Crossref record.
Catalytic Hydroprocessing of Fast Pyrolysis Bio-oil from Pine Sawdust
Abstract
Catalytic hydroprocessing has been applied to the fast pyrolysis liquid product (bio-oil) from softwood biomass in a bench-scale continuous-flow fixed-bed reactor system. The intent of the research was to develop process technology to convert the bio-oil into a petroleum refinery feedstock to supplement fossil energy resources and to displace imported feedstock. This paper is focused on the process experimentation and product analysis. A range of operating parameters, including temperature from 170 or 250 to 400 °C in the two-stage reactor and flow rate of 0.19 liquid hourly space velocity, was tested with bio-oil derived from pine wood. Times on stream of up to 90 h were evaluated, and losses of catalyst activity were assessed. Product yields of 0.35–0.45 g of oil product/g of dry bio-oil feed with hydrogen consumptions from 342 to 669 L/L of bio-oil feed were measured. Analyses determined that product oils with densities of 0.82–0.92 g/mL had oxygen contents of 0.2–2.7 wt % and total acid number (TAN) of <0.01–2.7 mg of KOH/g. In summation, the paper provides an initial understanding of the efficacy of hydroprocessing as applied to the Finnish pine bio-oil.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
Catalytic fast pyrolysis of lignocellulosic biomass
Liu, C., Wang, H., Karim, A. M., Sun, J., & Wang, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60414d · Cited by 1,117
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
Process development for hydrothermal liquefaction of algae feedstocks in a continuous-flow reactor
Elliott, D. C., Hart, T. R., Schmidt, A. J., Neuenschwander, G. G., Rotness, L. J., Olarte, M. V., Zacher, A. H., Albrecht, K. O., Hallen, R. T., & Holladay, J. E. (2013) · Algal Research · doi:10.1016/j.algal.2013.08.005 · Cited by 472
Self-citationHydrotreatment of pyrolysis bio-oil: A review
Han, Y., Gholizadeh, M., Tran, C.-C., Kaliaguine, S., Li, C.-Z., Olarte, M., & Garcia-Perez, M. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106140 · Cited by 292
Self-citation
Metadata
- Authors
- Elliott, D. C., Hart, T. R., Neuenschwander, G. G., Rotness, L. J., Olarte, M. V., Zacher, A. H., & Solantausta, Y.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-05-29
- Volume
- 26
- Issue
- 6
- Pages
- 3891-3896
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2041991502
- Cited by
- 216
- References
- 0
- FWCI
- 8.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Catalytic Hydroprocessing of Fast Pyrolysis Bio-oil from Pine Sawdust. https://app.cochat.ai/papers/10.1021/ef3004587
- The paper
- Elliott, D. C., Hart, T. R., Neuenschwander, G. G., Rotness, L. J., Olarte, M. V., Zacher, A. H., & Solantausta, Y. (2012). Catalytic Hydroprocessing of Fast Pyrolysis Bio-oil from Pine Sawdust. Energy & Fuels. https://doi.org/10.1021/ef3004587
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.