Fuel Properties of Highly Polyunsaturated Fatty Acid Methyl Esters. Prediction of Fuel Properties of Algal Biodiesel

Abstract

Biodiesel, defined as the monoalkyl esters of vegetable oils and animal fats, can be derived from other triacylglycerol-containing feedstocks. Algae are being considered for this purpose due to their claimed high production potential. However, there are no comprehensive reports regarding the fuel properties of biodiesel obtained from algal oils. Algal oils, with examples of some exceptions also mentioned here, often contain significant amounts of saturated and highly polyunsaturated (≥4 double bonds) fatty acid chains which influence fuel properties of the resulting biodiesel. In this connection, the relevant fuel properties of biodiesel from algal oils and the important fuel properties of highly polyunsaturated fatty acid methyl esters as they would occur in many biodiesel fuels obtained from algal oils, have not yet been reported. To fill this gap, in the present work for the first time two neat highly polyunsaturated fatty acid methyl esters with more than three double bonds, methyl 5( Z ),8( Z ),11( Z ),14( Z )-eicosatetraenoate (C20:4) and methyl 4( Z ),7( Z ),10( Z ),13( Z ),16( Z ),19( Z )-docosahexaenoate (C22:6), were investigated. The cetane numbers were determined as 29.6 for C20:4 and 24.4 for C22:6. Kinematic viscosity values were observed as 3.11 mm 2 /s for C20:4 and 2.97 mm 2 /s for C22:6, while oxidative stability values were below 0.1 h for both by the Rancimat test while densities were above 0.9 g/cm 3 . Two polyunsaturated C20 methyl esters, methyl 11( Z ),14( Z )-eicosadienoate and 11( Z ),14( Z ),17( Z )-eicosatrienoate, were also studied for kinematic viscosity, density, and oxidative stability to expand the database on these properties of C20 compounds and provide additional data to predict the properties of other highly polyunsaturated fatty acid methyl esters. Properties of biodiesel from algal oils are predicted with cetane numbers expected in the low to upper 40s and kinematic viscosity between 3 and 4 mm 2 /s for most algal biodiesel.