The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Catalytic Pyrolysis of Biomass over H+ZSM-5 under Hydrogen Pressure
Abstract
Catalytic pyrolysis of pine wood was carried out using H + ZSM-5 in a hydrogen environment. The first objective of this study was to investigate the effect of hydrogen pressure on catalytic pyrolysis using H + ZSM-5. The study found that there was no increase in the aromatic hydrocarbons as the hydrogen pressure increased. The second objective of this study was to incorporate a hydrogenation effect in addition to catalytic-cracking during pyrolysis so that the amount of hydrocarbons in the bio-oil could be increased. The effect of hydrogen pressure on the Mo-impregnated catalyst was investigated in pine wood pyrolysis. The Mo/ZSM-5 catalyst was not as active as H + ZSM-5 in lower pressures (100–300 psi); however, at 400 psi, Mo/ZSM-5 gave more hydrocarbons than H + ZSM-5 did. A significant increase in aromatic hydrocarbons was found when the H + ZSM-5 catalysts were impregnated with metals (Ni, Co, Mo, and Pt) as compared to just the zeolite at 400 psi. On average, 42.5 wt.% of biomass carbon was converted into hydrocarbons. Aromatic selectivity of major hydrocarbons was almost the same during hydrocatalytic pyrolysis of pine wood at 400 psi in the presence of all metal-impregnated H + ZSM-5 catalysts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Cited by
Catalytic fast pyrolysis of lignocellulosic biomass
Liu, C., Wang, H., Karim, A. M., Sun, J., & Wang, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60414d · Cited by 1,117
Rezaei, P. S., Shafaghat, H., & Daud, W. M. A. W. (2014) · Applied Catalysis A: General · doi:10.1016/j.apcata.2013.09.036 · Cited by 412
A review on the upgradation techniques of pyrolysis oil
Gollakota, A. R. K., Reddy, M., Subramanyam, M. D., & Kishore, N. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.180 · Cited by 395
Qiu, B., Tao, X., Wang, J., Liu, Y., Li, S., & Chu, H. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115647 · Cited by 314
Dabros, T. M. H., Stummann, M. Z., Høj, M., Jensen, P. A., Grunwaldt, J.-D., Gabrielsen, J., Mortensen, P. M., & Jensen, A. D. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.05.002 · Cited by 309
Metadata
- Authors
- Thangalazhy-Gopakumar, S., Adhikari, S., & Gupta, R. B.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-08-01
- Volume
- 26
- Issue
- 8
- Pages
- 5300-5306
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W1970896169
- Cited by
- 165
- References
- 1
- FWCI
- 3.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.