CoChat

Formation of Anhydro-sugars in the Primary Volatiles and Solid Residues from Cellulose Fast Pyrolysis in a Wire-Mesh Reactor

Gong, Xun, Yu, Yun, Gao, Xiangpeng, Qiao, Yu, Xu, Minghou, Wu, Hongwei · 2014 · Energy & Fuels
Cited by 66

The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.

Abstract

The unique design of wire-mesh reactors (WMR) enables the collection of primary volatiles with minimized secondary reactions from fast pyrolysis of solid fuels. This paper reports the formation of anhydro-sugars in both primary volatiles and solid residues from the fast pyrolysis of microcrystalline cellulose in a WMR. Under fast pyrolysis, cellulose is rapidly converted into an intermediate phase, and the maximal yield of the water-soluble intermediates achieved in this study is ∼21% on a carbon basis at 450 °C, much higher than those achieved in other pyrolysis reactor systems. The solid residue consists of sugar and anhydro-sugar oligomers with a wide range of degrees of polymerization (DPs). However, only anhydro-sugars with DPs up to 3 can be identified in the primary volatiles, and the presence of these anhydro-sugars is evident even at 300 °C. Because of high boiling points, cellobiosan and cellotriosan are impossible to be released into the vapor phase via evaporation under the conditions. These high-DP anhydro-sugars are also unlikely formed as a result of oligomerization of levoglucosan in the vapor phase because such secondary reactions are minimized in the WMR. Therefore, cellobiosan and cellotriosan are most likely released into the vapor phase as aerosols, driven by the ejection mechanism (i.e., carryover by the intensive release of volatiles). Among the anhydro-sugars in the primary volatiles, levoglucosan has yields of 27–44% (on a weight basis) depending upon pyrolysis temperature, while cellobiosan and cellotriosan have yields of 3–9 and 1–2%, respectively. This leads to the highest selectivity of 34–60% (on a weight basis) in the condensed liquid product for levoglucosan. The yields of anhydro-sugars initially increase with the pyrolysis temperature and achieve the maximal value between 400 and 450 °C. Further increases in the pyrolysis temperature lead to substantial reductions in the yields of anhydro-sugars in the primary volatiles (although the yield of liquid product remains unchanged), indicating the increased formation of water-insoluble compounds in the primary volatiles at increased temperatures.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ef501112q

Cites

5 of 5 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 5 references

Cited by

Metadata

Authors
Gong, X., Yu, Y., Gao, X., Qiao, Y., Xu, M., & Wu, H.
Venue
Energy & Fuels
Published
2014-07-16
Volume
28
Issue
8
Pages
5204-5211
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2030502879
Cited by
66
References
5
FWCI
2.98
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.