Polycyclic Aromatic Hydrocarbon Formation from the Pyrolysis/Gasification of Lignin at Different Reaction Conditions
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The effect of reaction conditions, temperature, heating rate, and reaction atmosphere on the formation of polycyclic aromatic hydrocarbons (PAHs) from lignin was studied in a fixed-bed reactor. When the temperature was increased from 500 to 900 °C, most PAHs increased with temperature, except 1-methynaphthalene and 2-methynaphthalene, which decreased slightly when the temperature was increased from 800 to 900 °C. With the increase of the temperature, the percentage of 2-ring PAHs decreased and the percentage of 3- and 4-ring PAHs increased. The increase in the total PAH with the temperature could be fitted by a quadratic function. The PAH generation from slow pyrolysis of lignin was much lower than that from fast pyrolysis. In comparison of the PAH generation in different reaction atmospheres, experiments in N 2 produced the most PAHs, followed by the reaction in air and CO 2 . During the pyrolysis/gasification of lignin, it is suggested that there were two kinds of secondary reactions, dehydroxylation and demethoxylation, and they might occur at the same time. Then, PAHs could be formed from secondary reactions of derivatives of benzene, which increased with the increase of the temperature. Slow pyrolysis generated less PAHs because of the limitation of secondary reactions. With the addition of air or CO 2, derivatives of benzene and phenol could be oxidized; thus, less PAHs were generated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Effect of the Temperature on the Composition of Lignin Pyrolysis Products
Jiang, G., Nowakowski, D. J., & Bridgwater, A. V. (2010) · Energy & Fuels · doi:10.1021/ef100363c · Cited by 332
Gas- and solid/liquid-phase reactions during pyrolysis of softwood and hardwood lignins
Asmadi, M., Kawamoto, H., & Saka, S. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.08.003 · Cited by 169
Thermal reactivities of catechols/pyrogallols and cresols/xylenols as lignin pyrolysis intermediates
Asmadi, M., Kawamoto, H., & Saka, S. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.04.012 · Cited by 136
Cited by
Kawamoto, H. (2017) · Journal of Wood Science · doi:10.1007/s10086-016-1606-z · Cited by 664
State-of-the-art on the production and application of carbon nanomaterials from biomass
Wang, Z., Shen, D., Wu, C., & Gu, S. (2018) · Green Chemistry · doi:10.1039/c8gc01748d · Cited by 404
Self-citationA comprehensive review of primary strategies for tar removal in biomass gasification
Cortazar, M., Santamaria, L., Lopez, G., Alvarez, J., Zhang, L., Wang, R., Bi, X., & Olazar, M. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.116496 · Cited by 390
Lin, X., Zhang, Z., Wang, Q., & Sun, J. (2022) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-020-00861-4 · Cited by 43
Hung, C.-M., Chen, C.-W., Huang, C.-P., Yang, Y.-Y., & Dong, C.-D. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2022.127246 · Cited by 35
Metadata
- Authors
- Zhou, H., Wu, C., Onwudili, J. A., Meng, A., Zhang, Y., & Williams, P. T.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-09-30
- Volume
- 28
- Issue
- 10
- Pages
- 6371-6379
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2026680713
- Cited by
- 132
- References
- 4
- FWCI
- 2.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.