Microwave Pyrolysis of Biomass: Control of Process Parameters for High Pyrolysis Oil Yields and Enhanced Oil Quality
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The oil yield and quality of pyrolysis oil from microwave heating of biomass was established by studying the behavior of Larch in microwave processing. This is the first study in biomass pyrolysis to use a microwave processing technique and methodology that is fundamentally scalable, from which the basis of design for a continuous processing system can be derived to maximize oil yield and quality. It is shown systematically that sample size is a vital parameter that has been overlooked by previous work in this field. When sample size is controlled, the liquid product yield is comparable to conventional pyrolysis and can be achieved at an energy input of around 600 kWh/t. The quality of the liquid product is significantly improved compared to conventional pyrolysis processes, which results from the very rapid heating and quenching that can be achieved with microwave processing. The yields of levoglucosan and phenolic compounds were found to be an order of magnitude higher in microwave pyrolysis when compared with conventional fast pyrolysis. Geometry is a key consideration for the development of a process at scale, and the opportunities and challenges for scale-up are discussed within this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Cited by
Hoang, A. T., Ong, H. C., Fattah, I. M. R., Chong, C. T., Cheng, C. K., Sakthivel, R., & Ok, Y. S. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106997 · Cited by 512
Chen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Arpia, A. A., Chen, W.-H., Lam, S. S., Rousset, P., & de Luna, M. D. G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126233 · Cited by 375
Ge, S., Yek, P. N. Y., Cheng, Y. W., Xia, C., Wan Mahari, W. A., Liew, R. K., Peng, W., Yuan, T.-Q., Tabatabaei, M., Aghbashlo, M., et al. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110148 · Cited by 329
Kostas, E. T., Beneroso, D., & Robinson, J. P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.135 · Cited by 319
“properties of biomass at elevated temperatures (within the 100°C - 900°C temperature range) [176, 185, 186, 188, 189].”
Self-citationDing, K., Liu, S., Huang, Y., Liu, S., Zhou, N., Peng, P., Wang, Y., Chen, P., & Ruan, R. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.07.001 · Cited by 294
Challenges and opportunities in microwave-assisted catalytic pyrolysis of biomass: A review
Ren, X., Shanb Ghazani, M., Zhu, H., Ao, W., Zhang, H., Moreside, E., Zhu, J., Yang, P., Zhong, N., & Bi, X. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.118970 · Cited by 272
A review on the pyrolysis of woody biomass to bio-oil: Focus on kinetic models
Papari, S., & Hawboldt, K. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.191 · Cited by 270
Technical challenges in scaling up the microwave technology for biomass processing
Siddique, I. J., Salema, A. A., Antunes, E., & Vinu, R. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111767 · Cited by 189
A review of the next-generation biochar production from waste biomass for material applications
Mishra, R. K., & Mohanty, K. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.167171 · Cited by 146
Hydrothermal liquefaction of lignin to aromatic chemicals: impact of lignin structure
Cao, Y., Zhang, C., Tsang, D. C. W., Fan, J., Clark, J. H., & Zhang, S. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c01617 · Cited by 128
Microwave pyrolysis of olive pomace for bio-oil and bio-char production
Kostas, E. T., Durán-Jiménez, G., Shepherd, B. J., Meredith, W., Stevens, L. A., Williams, O. S. A., Lye, G. J., & Robinson, J. P. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123404 · Cited by 98
Self-citation
Metadata
- Authors
- Robinson, J., Dodds, C., Stavrinides, A., Kingman, S., Katrib, J., Wu, Z., Medrano, J., & Overend, R.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-02-23
- Volume
- 29
- Issue
- 3
- Pages
- 1701-1709
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2314777710
- Cited by
- 107
- References
- 1
- FWCI
- 4.72
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.