The DOI matches its Crossref record.
Use of Ores and Industrial Products As Oxygen Carriers in Chemical-Looping Combustion
Abstract
A screening of Fe- and Mn-based ores and industrial products was made in order to identify suitable low-cost materials that could be used as oxygen carriers in chemical-looping combustion (CLC). A laboratory fluidized bed reactor system, simulating chemical-looping combustion by exposing the sample to alternating reducing and oxidizing conditions, was used. Fifteen grams of each material with a particle size of 125−180 μm was exposed to a flow of 450 mL n /min of either methane or syngas (50% CO, 50% H 2 ) during reduction. During the oxidizing phase to a flow of 1000 mL n /min, 5% O 2 in nitrogen was used. All materials had a high reactivity with syngas. Some materials such as the Mn-based Colormax and the Fe-based Glödskal had also a high reactivity with methane making them possible candidates for CLC with gaseous fuel. Some of the materials, especially the Mn-based ones, showed poor mechanical stability and poor fluidizing properties. Roughly half of the Fe-based materials, but only one of the Mn-based materials, had properties that could make them suitable as oxygen carriers in a CLC system for solid fuels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Self-citationProgress in Chemical-Looping Combustion and Reforming technologies
Adanez, J., Abad, A., Garcia-Labiano, F., Gayan, P., & de Diego, L. F. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.09.001 · Cited by 2,230
Chemical-looping combustion of solid fuels – Status of development
Lyngfelt, A. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.05.043 · Cited by 387
Self-citationKinetics of redox reactions of ilmenite for chemical-looping combustion
Abad, A., Adánez, J., Cuadrat, A., García-Labiano, F., Gayán, P., & de Diego, L. F. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2010.11.010 · Cited by 332
Abad, A., Adánez-Rubio, I., Gayán, P., García-Labiano, F., de Diego, L. F., & Adánez, J. (2012) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2011.10.016 · Cited by 262
Metadata
- Authors
- Leion, H., Mattisson, T., & Lyngfelt, A.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-03-05
- Volume
- 23
- Issue
- 4
- Pages
- 2307-2315
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2025435630
- Cited by
- 175
- References
- 0
- FWCI
- 7.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.