Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 159

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Kinetics of the Thermal Decomposition of Biomass

Saddawi, A., Jones, J. M., Williams, A., Wójtowicz, M. A. · 2010 · Energy & Fuels

Abstract

This paper is concerned with the kinetics of the thermal decomposition of a woody biomass, willow. It addresses two questions. First, what method of data analysis is appropriate for extracting reliable kinetic data from thermogravimetric analysis (TGA) experiments? Second, what kinetics are most suitable for high heating rate situations such as those present in pulverized fuel power stations? It contains kinetic analysis of willow TGA data using a variety of approaches. A review of previously published work on biomass and its polymeric components helps ascertain the variation in kinetics, reasons for differences, and extrapolation to flame temperatures. The data falls into two main categories: (1) very high E and A values (>100 and up to 270 kJ/mol, and up to 10 17 s −1 ) derived when model biomass components are studied, for example, cellulose; or the data is interpreted as the sum of a number of individual first-order reactions, for example, FG-BioMass; (2) intermediate and low E and A values (50−100 kJ/mol and <∼10 5 s −1 ) derived using a number of global approaches. For low heating rate experiments (10 1 K/min), the global first-order reaction kinetic models that tend to yield low E values, such as the reaction rate constant method, work well. High E kinetics can also work well at low heating rate, but only if the reaction is assumed to be due to the sum of a number of individual steps, such as the biochemical components degrading independently, or the functional group approach. For higher heating rates (>10 3 K/s) high E kinetics predict conversion well, and this can be rationalized since primary cracking reactions will dominate under these conditions. However, at heating rates of 10 5 K/s and temperatures of 1500 °C (i.e., flame conditions), a compensation on the rates is seen and the choice of rate parameters is less critical. Two sets of kinetic data, E = 178.7 kJ/mol, A = 2.2 × 10 13 s −1 and E = 48.7 kJ/mol, A = 6.84 × 10 3 s −1, both predict conversions in keeping with the available experimental data.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ef900933k

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Cited by

Metadata

Authors
Saddawi, A., Jones, J. M., Williams, A., & Wójtowicz, M. A.
Venue
Energy & Fuels
Published
2009-12-01
Volume
24
Issue
2
Pages
1274-1282
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2004171638
Cited by
159
References
1
FWCI
5.05
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.