Fast Pyrolysis of Pine Sawdust in a Fluidized-Bed Reactor
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Pine ( Pinus strobus ) sawdust was pyrolyzed in a fluidized-bed reactor between the temperatures of 400 and 600 °C. The fixed-bed volume and residence time were optimized to maximize the liquid yield. We report the detailed physical and chemical properties of the bio-oil fraction collected during fast pyrolysis. The liquid yield was maximized at 500 °C, whereas increased gas formation occurred at 600 °C. 13 C NMR of the bio-oil fractions indicated a decrease in the carbohydrate fraction and an increase in the aromatic fraction when pyrolysis temperatures were increased from 500 to 600 °C. Over the ranges of our investigation, the effects of the fixed-bed volume and residence time were negligible on the chemical composition of the bio-oil. Toluene and ethyl acetate bio-oil extracts were analyzed by gas chromatography/mass spectrometry following chemical derivatization. At increased reaction temperatures, the process favored conversion of guaiacols to catechols.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Garcia-Perez, M., Wang, S., Shen, J., Rhodes, M., Lee, W. J., & Li, C.-Z. (2008) · Energy & Fuels · doi:10.1021/ef7007634 · Cited by 235
Primary and secondary lignin pyrolysis reaction pathways
Jegers, H. E., & Klein, M. T. (1985) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200028a030 · Cited by 182
The radical-induced decomposition of 2-methoxyphenol
Dorrestijn, E., & Mulder, P. (1999) · Journal of the Chemical Society, Perkin Transactions 2 · doi:10.1039/a809619h · Cited by 87
Cited by
Application of biochar for the removal of pollutants from aqueous solutions
Tan, X., Liu, Y., Zeng, G., Wang, X., Hu, X., Gu, Y., & Yang, Z. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2014.12.058 · Cited by 2,081
“Fast pyrolysis usually uses short residence time (62 s) and the peak temperature is set between 300 and 1000 C in order to obtain the highest bio-oil yield, but inhibit the formation of charcoal (Mohan et al., 2006; DeSisto et al., 2010; Manyà, 2012; Shah et al., 2012).”
Recent advances in utilization of biochar
Qian, K., Kumar, A., Zhang, H., Bellmer, D., & Huhnke, R. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.10.074 · Cited by 915
Kim, K. H., Kim, J.-Y., Cho, T.-S., & Choi, J. W. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.04.094 · Cited by 696
Carpenter, D., Westover, T. L., Czernik, S., & Jablonski, W. (2014) · Green Chem. · doi:10.1039/c3gc41631c · Cited by 686
Meyer, S., Glaser, B., & Quicker, P. (2011) · Environmental Science & Technology · doi:10.1021/es201792c · Cited by 660
Metadata
- Authors
- DeSisto, W. J., Hill, N., Beis, S. H., Mukkamala, S., Joseph, J., Baker, C., Ong, T.-H., Stemmler, E. A., Wheeler, M. C., Frederick, B. G., & van Heiningen, A.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-03-16
- Volume
- 24
- Issue
- 4
- Pages
- 2642-2651
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2089540641
- Cited by
- 142
- References
- 4
- FWCI
- 7.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.