Biochar as a Fuel: 2. Significant Differences in Fuel Quality and Ash Properties of Biochars from Various Biomass Components of Mallee Trees
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
This study shows the significant differences in the fuel quality and ash properties of biochars produced from the slow pyrolysis of various biomass components (leaf, wood, and bark). The objective is to identify which component is likely to cause problems in subsequent utilization processes if biochar produced from various components of mallee trees is used as a fuel. It is found that the pyrolysis of different biomass components produced biochars with distinct characteristics, largely because of the differences in the biological structure of these components. Leaf biochar showed the poorest grindability, possibly because of the presence of abundant tough oil glands in leaf. Even for the biochar prepared from the pyrolysis of leaf at 800 °C, the oil gland enclosures remained largely intact after grinding. Biochars produced from leaf, bark, and wood components also have significant differences in ash properties. Even with low ash content, wood biochars have low Si/K and Ca/K ratios, suggesting that these biochars may have a high slagging propensity, in comparison to bark and leaf biochars. It appears that, in the utilization of biochar prepared from mallee biomass, the grindability is likely to be limited by the leaf fraction while ash-related problems could be due to the wood and bark components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemical properties of solid biofuels—significance and impact
Obernberger, I., Brunner, T., & Bärnthaler, G. (2006) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2006.06.011 · Cited by 774
The behavior of inorganic material in biomass-fired power boilers: field and laboratory experiences
Baxter, L. L., Miles, T. R., Miles, T. R., Jenkins, B. M., Milne, T., Dayton, D., Bryers, R. W., & Oden, L. L. (1998) · Fuel Processing Technology · doi:10.1016/s0378-3820(97)00060-x · Cited by 669
Ash deposition during biomass and coal combustion: A mechanistic approach
Baxter, L. L. (1993) · Biomass and Bioenergy · doi:10.1016/0961-9534(93)90031-x · Cited by 429
Garcia-Perez, M., Wang, S., Shen, J., Rhodes, M., Lee, W. J., & Li, C.-Z. (2008) · Energy & Fuels · doi:10.1021/ef7007634 · Cited by 235
Cited by
Weber, K., & Quicker, P. (2018) · Fuel · doi:10.1016/j.fuel.2017.12.054 · Cited by 1,522
Biochar: A synthesis of its agronomic impact beyond carbon sequestration
Spokas, K. A., Cantrell, K. B., Novak, J. M., Archer, D. W., Ippolito, J. A., Collins, H. P., Boateng, A. A., Lima, I. M., Lamb, M. C., McAloon, A. J., et al. (2012) · Journal of Environmental Quality · doi:10.2134/jeq2011.0069 · Cited by 1,014
Wannapeera, J., Fungtammasan, B., & Worasuwannarak, N. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.04.010 · Cited by 348
Preparation of high adsorption capacity bio-chars from waste biomass
Liu, W.-J., Zeng, F.-X., Jiang, H., & Zhang, X.-S. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.06.014 · Cited by 307
Development of biochar as fuel and catalyst in energy recovery technologies
Waqas, M., Aburiazaiza, A. S., Miandad, R., Rehan, M., Barakat, M. A., & Nizami, A. S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.04.017 · Cited by 288
Metadata
- Authors
- Abdullah, H., Mediaswanti, K. A., & Wu, H.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-02-08
- Volume
- 24
- Issue
- 3
- Pages
- 1972-1979
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2018507266
- Cited by
- 112
- References
- 4
- FWCI
- 6.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.