The DOI matches its Crossref record.
Inorganic Compounds in Biomass Feedstocks. 1. Effect on the Quality of Fast Pyrolysis Oils
Abstract
Inorganic compounds especially potassium, calcium, sodium, silicon, phosphorus, and chlorine are the main constituents of the ash in biomass feedstocks. The concentrations of ash range from less than 1% in softwoods to 15% in herbaceous biomass and agricultural residues. During biomass pyrolysis, these inorganics, especially potassium and calcium, catalyze biomass decomposition and char-forming reactions. Chars formed during these reactions invariably end up in the biomass pyrolysis oils (biocrude oils) as suspended submicron particles. The presence of high concentrations of submicron char particles in biocrude oils will make them problematic for combustion in steam boilers, diesel engines, and turbine operations because of the potential release of the ash and alkali metals during combustion. We experimented with sequential cold filtering of biocrude oils using filters of varying pore size and this revealed that most of the ash and alkali metals detected in biocrude oils are trapped in the chars. Leaching studies conducted on the chars suspended in the oils showed no leaching of alkali metals from the chars into the oils. Cold filtration of the oils dissolved in acetone was ineffective in reducing the alkali metals content to acceptable levels, but hot gas filtration of the pyrolysis vapors reduced the alkali metals content below 10 ppm. Our data suggest that hot gas filtration can potentially reduce the ash and alkali metals content of the biocrude oils to acceptable levels so they can be used as turbine, diesel engine, or boiler fuels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
A comprehensive review on the pyrolysis of lignocellulosic biomass
Dhyani, V., & Bhaskar, T. (2018) · Renewable Energy · doi:10.1016/j.renene.2017.04.035 · Cited by 1,545
Catalytic fast pyrolysis of lignocellulosic biomass
Liu, C., Wang, H., Karim, A. M., Sun, J., & Wang, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60414d · Cited by 1,117
Overview of fuel properties of biomass fast pyrolysis oils
Lu, Q., Li, W.-Z., & Zhu, X.-F. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.01.001 · Cited by 847
A review on bio-oil production from biomass by using pyrolysis method
Isahak, W. N. R. W., Hisham, M. W. M., Yarmo, M. A., & Yun Hin, T.-Y. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.039 · Cited by 624
Metadata
- Authors
- Agblevor, F. A., & Besler, S.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 1996-03-20
- Volume
- 10
- Issue
- 2
- Pages
- 293-298
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2005822940
- Cited by
- 222
- References
- 0
- FWCI
- 3.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Inorganic Compounds in Biomass Feedstocks. 1. Effect on the Quality of Fast Pyrolysis Oils. https://app.cochat.ai/papers/10.1021/ef950202u
- The paper
- Agblevor, F. A., & Besler, S. (1996). Inorganic Compounds in Biomass Feedstocks. 1. Effect on the Quality of Fast Pyrolysis Oils. Energy & Fuels. https://doi.org/10.1021/ef950202u
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.