The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Mathematical Model for Wood PyrolysisComparison of Experimental Measurements with Model Predictions
Abstract
Experimental and modeling work on pyrolysis of wood under regimes controlled by heat and mass transfer are presented. In a single-particle, bell-shaped Pyrex reactor, one face of a uniform and well-characterized cylinder ( D = 20 mm, L = 30 mm) prepared from Norwegian spruce has been one-dimensionally heated by using a Xenon-arc lamp as a radiant heat source. The effect of applied heat flux on the product yield distributions (char, tar, and gas yield) and converted fraction have been investigated. The experiments show that heat flux alters the pyrolysis products as well as the intraparticle temperatures to a great extent. A comprehensive mathematical model that can simulate pyrolysis of wood is presented. The thermal degradation of wood involves the interaction in a porous media of heat, mass, and momentum transfer with chemical reactions. Heat is transported by conduction, convection, and radiation, and mass transfer is driven by pressure and concentration gradients. The modeling of these processes involves the simultaneous solution of the conservation equations for mass and energy together with Darcy's law for velocity and kinetic expressions describing the rate of reaction. By using three parallel competitive reactions to account for primary production of gas, tar, and char, and a consecutive reaction for the secondary cracking of tar, the predicted intraparticle temperature profiles, ultimate product yield distributions, and converted fraction agreed well with the experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Siau, J. F. (1984) · Springer series in wood science · doi:10.1007/978-3-642-69213-0 · Cited by 1,190
Cellulose Pyrolysis Kinetics: The Current State of Knowledge
Antal, M. J. J., & Varhegyi, G. (1995) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00042a001 · Cited by 859
Developments in Thermochemical Biomass Conversion: Volume 1 / Volume 2
(1997) · Springer eBooks · doi:10.1007/978-94-009-1559-6 · Cited by 644
Advances in Thermochemical Biomass Conversion
(1993) · Springer eBooks · doi:10.1007/978-94-011-1336-6 · Cited by 540
Research in Thermochemical Biomass Conversion
(1988) · Springer eBooks · doi:10.1007/978-94-009-2737-7 · Cited by 422
A Round-Robin Study of Cellulose Pyrolysis Kinetics by Thermogravimetry
Grønli, M., Antal, M. J., & Várhegyi, G. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie980601n · Cited by 309
Self-citationA theoretical and experimental study of the thermal degradation of biomass
Grønli, M. G. (1996) · NORA - Norwegian Open Research Archives · Cited by 283
Self-citationThe combustion of wood. Part I
Bamford, C. H., Crank, J., & Malan, D. H. (1946) · Mathematical Proceedings of the Cambridge Philosophical Society · doi:10.1017/s030500410002288x · Cited by 255
Competitive Reactions in the Thermal Decomposition of Cellulose
Arseneau, D. F. (1971) · Canadian Journal of Chemistry · doi:10.1139/v71-101 · Cited by 249
Thermal Uses and Properties of Carbohydrates and Lignins
(1976) · Elsevier eBooks · doi:10.1016/b978-0-12-637750-7.x5001-8 · Cited by 241
A model for pyrolysis of wet wood
Alves, S. S., & Figueiredo, J. L. (1989) · Chemical Engineering Science · doi:10.1016/0009-2509(89)85096-1 · Cited by 182
Fredlund, B. (1988) · Lund University Publications (Lund University) · Cited by 55
NUMERICAL ANALYSIS OF HEAT AND MASS TRANSFER IN DRYING AND PYROLYSIS OF POROUS MEDIA
Melaaen, M. C. (1996) · Numerical Heat Transfer Part A Applications · doi:10.1080/10407789608913796 · Cited by 49
Self-citation
Cited by
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
Biomass pyrolysis-a review of modelling, process parameters and catalytic studies
Sharma, A., Pareek, V., & Zhang, D. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.193 · Cited by 675
Reaction mechanisms and multi-scale modelling of lignocellulosic biomass pyrolysis
Anca-Couce, A. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.10.002 · Cited by 664
Experimental and theoretical investigation of heat and mass transfer processes during wood pyrolysis
Park, W. C., Atreya, A., & Baum, H. R. (2010) · Combustion and Flame · doi:10.1016/j.combustflame.2009.10.006 · Cited by 425
Detailed kinetic modeling of the thermal degradation of lignins
Faravelli, T., Frassoldati, A., Migliavacca, G., & Ranzi, E. (2010) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2009.10.018 · Cited by 376
Metadata
- Authors
- Grønli, M. G., & Melaaen, M. C.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-05-31
- Volume
- 14
- Issue
- 4
- Pages
- 791-800
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W1992951414
- Cited by
- 320
- References
- 13
- FWCI
- 3.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.