The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The “Shadow Effect” in Colloid Transport and Deposition Dynamics in Granular Porous Media: Measurements and Mechanisms
Abstract
The role of hydrodynamic and colloidal interactions in the transport and deposition dynamics of colloidal particles in granular porous media is systematically investigated. Colloid transport experiments were conducted with three suspensions of positively charged colloidal latex particles (133, 288, and 899 nm in diameter) and negatively charged packed quartz grains. The column experiments were carried out under a wide range of solution ionic strengths (10 - 5.5 −10 - 2.0 M) and approach velocities (10 - 4.5 −10 - 2.5 m/s) until a complete breakthrough was attained, thus allowing unambiguous determination of the maximum attainable surface coverage for each deposition run. Results show that the rate of blocking and the maximum attainable surface coverage are determined by a unique interplay between flow intensity, particle size, and solution ionic strength. It is suggested that the tangential or shear component of the fluid flow around collector grains creates a “shadow zone” on the collector surface down gradient of deposited particles where the probability of subsequent deposition is substantially reduced. The shadow zone is determined by the combined effect of hydrodynamic interaction and electrostatic double layer repulsion. Increasing the approach velocity and particle size and decreasing the solution ionic strength result in a larger area of the shadow zone and hence reduced maximum attainable surface coverages. It is also proposed that sand grain surface roughness influences the dynamics of particle deposition by creating shadow zones down gradient of surface protrusions where particle deposition is significantly hindered.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Grolimund, D., Borkovec, M., Barmettler, K., & Sticher, H. (1996) · Environmental Science & Technology · doi:10.1021/es960246x · Cited by 339
Cited by
Review on subsurface colloids and colloid-associated contaminant transport in saturated porous media
Kanti Sen, T., & Khilar, K. C. (2006) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2005.09.001 · Cited by 502
Nanoscale zerovalent iron particles for groundwater remediation: a review
Tosco, T., Petrangeli Papini, M., Cruz Viggi, C., & Sethi, R. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.12.026 · Cited by 463
Physico-chemistry from initial bacterial adhesion to surface-programmed biofilm growth
Carniello, V., Peterson, B. W., van der Mei, H. C., & Busscher, H. J. (2018) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2018.10.005 · Cited by 447
Fang, J., Shan, X.-Q., Wen, B., Lin, J.-M., & Owens, G. (2009) · Environmental Pollution · doi:10.1016/j.envpol.2008.11.006 · Cited by 364
Effect of Molecular Scale Roughness of Glass Beads on Colloidal and Bacterial Deposition
Shellenberger, K., & Logan, B. E. (2002) · Environmental Science & Technology · doi:10.1021/es015515k · Cited by 261
Metadata
- Authors
- Ko, C.-H., & Elimelech, M.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-08-04
- Volume
- 34
- Issue
- 17
- Pages
- 3681-3689
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W1988377532
- Cited by
- 181
- References
- 1
- FWCI
- 6.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.