The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Impact of Biodiesel Source Material and Chemical Structure on Emissions of Criteria Pollutants from a Heavy-Duty Engine
Abstract
Biodiesel is an oxygenated diesel fuel made from vegetable oils and animal fats by conversion of the triglyceride fats to esters via transesterification. In this study we examined biodiesels produced from a variety of real-world feedstocks as well as pure (technical grade) fatty acid methyl and ethyl esters for emissions performance in a heavy-duty truck engine. The objective was to understand the impact of biodiesel chemical structure, specifically fatty acid chain length and number of double bonds, on emissions of NOx and particulate matter (PM). A group of seven biodiesels produced from real-world feedstocks and 14 produced from pure fatty acids were tested in a heavy-duty truck engine using the U.S. heavy-duty federal test procedure (transient test). It was found that the molecular structure of biodiesel can have a substantial impact on emissions. The properties of density, cetane number, and iodine number were found to be highly correlated with one another. For neat biodiesels, PM emissions were essentially constant at about 0.07 g/bhp-h for all biodiesels as long as density was less than 0.89 g/cm3 or cetane number was greater than about 45. NOx emissions increased with increasing fuel density or decreasing fuel cetane number. Increasing the number of double bonds, quantified as iodine number, correlated with increasing emissions of NOx. Thus the increased NOx observed for some fuels cannot be explained by the NOx/PM tradeoff and is therefore not driven by thermal NO formation. For fully saturated fatty acid chains the NOx emission increased with decreasing chain length for tests using 18, 16, and 12 carbon chain molecules. Additionally, there was no significant difference in NOx or PM emissions for the methyl and ethyl esters of identical fatty acids.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Internal combustion engine fundamentals
(1988) · Choice Reviews Online · doi:10.5860/choice.26-0943 · Cited by 16,694
Mechanism and modeling of nitrogen chemistry in combustion
Miller, J. A., & Bowman, C. T. (1989) · Progress in Energy and Combustion Science · doi:10.1016/0360-1285(89)90017-8 · Cited by 3,172
Combustion of fat and vegetable oil derived fuels in diesel engines
Graboski, M. S., & McCormick, R. L. (1998) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(97)00034-8 · Cited by 1,870
Self-citation
Cited by
Dependence of biodiesel fuel properties on the structure of fatty acid alkyl esters
Knothe, G. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2004.11.002 · Cited by 2,329
“Designer” Biodiesel: Optimizing Fatty Ester Composition to Improve Fuel Properties
Knothe, G. (2008) · Energy & Fuels · doi:10.1021/ef700639e · Cited by 1,291
Biodiesel and renewable diesel: A comparison
Knothe, G. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.11.004 · Cited by 983
Biodiesel production, properties, and feedstocks
Moser, B. R. (2009) · In Vitro Cellular & Developmental Biology - Plant · doi:10.1007/s11627-009-9204-z · Cited by 787
Knothe, G., & Razon, L. F. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2016.08.001 · Cited by 734
Metadata
- Authors
- McCormick, R. L., Graboski, M. S., Alleman, T. L., Herring, A. M., & Tyson, K. S.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-03-30
- Volume
- 35
- Issue
- 9
- Pages
- 1742-1747
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2005504740
- Cited by
- 633
- References
- 3
- FWCI
- 5.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.