The DOI matches its Crossref record.
Fe(0) Nanoparticles for Nitrate Reduction: Stability, Reactivity, and Transformation
Abstract
The pyrophoric character of zerovalent iron nanoparticles and cumbersome handling of this material has been a drawback in practical applications, despite the expectation of an enhanced reactivity. We have been interested in how the iron nanoparticles can gain stability in air without significantly sacrificing reactivity. The freshly synthesized iron nanoparticles ignited spontaneously upon exposure to air. However, when exposed slowly to air, an approximately 5 nm coating of iron oxide was formed on the surface of particles. The oxide shell did not thicken for at least two months, indicating no sign of further corrosion of iron particles. The reactivity studies on nitrate reduction showed that the freshly synthesized iron reacted at the fastest rate. After formation of the oxide shell the rate constants decreased by ca. 50% of that of fresh iron, but were still higher than that of commercial grade micro- or milli-sized iron powder. Nitrate (50 ppm/350 mL) can be recharged 6 times into a bottle containing 0.5 g of iron nanoparticles. The reduction rate of the second cycle was the fastest among the six cycles, which can be attributed to the increase of surface area and the fresh iron surfaces that were bared by the dissolution of oxidized iron species on the surface. The oxidized iron was transformed to crystalline magnetite (Fe3O4) in solution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electrocatalytic reduction of nitrate – a step towards a sustainable nitrogen cycle
Xu, H., Ma, Y., Chen, J., Zhang, W.-X., & Yang, J. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00857a · Cited by 1,160
Li, X.-Q., Elliott, D. W., & Zhang, W.-X. (2006) · Critical Reviews in Solid State and Materials Sciences · doi:10.1080/10408430601057611 · Cited by 1,058
Magnetic nanoparticles: Essential factors for sustainable environmental applications
Tang, S. C. N., & Lo, I. M. C. (2013) · Water Research · doi:10.1016/j.watres.2013.02.039 · Cited by 891
Nanoscale zero valent iron and bimetallic particles for contaminated site remediation
O’Carroll, D., Sleep, B., Krol, M., Boparai, H., & Kocur, C. (2013) · Advances in Water Resources · doi:10.1016/j.advwatres.2012.02.005 · Cited by 872
Activity and Selectivity Trends in Electrocatalytic Nitrate Reduction on Transition Metals
Liu, J.-X., Richards, D., Singh, N., & Goldsmith, B. R. (2019) · ACS Catalysis · doi:10.1021/acscatal.9b02179 · Cited by 847
Application of nanoscale zero valent iron (NZVI) for groundwater remediation in Europe
Mueller, N. C., Braun, J., Bruns, J., Černík, M., Rissing, P., Rickerby, D., & Nowack, B. (2012) · Environmental Science and Pollution Research · doi:10.1007/s11356-011-0576-3 · Cited by 487
Heavy metal removal using nanoscale zero-valent iron (nZVI): Theory and application
Li, S., Wang, W., Liang, F., & Zhang, W.-X. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.01.032 · Cited by 431
Reduction of nitrate by zero valent iron (ZVI)-based materials: A review
Liu, Y., & Wang, J. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.03.317 · Cited by 411
Unveiling Cutting‐Edge Developments in Electrocatalytic Nitrate‐to‐Ammonia Conversion
Zhang, H., Wang, H., Cao, X., Chen, M., Liu, Y., Zhou, Y., Huang, M., Xia, L., Wang, Y., Li, T., et al. (2024) · Advanced Materials · doi:10.1002/adma.202312746 · Cited by 411
Iron nanoparticles for environmental clean-up: recent developments and future outlook
Yan, W., Lien, H.-L., Koel, B. E., & Zhang, W.-X. (2013) · Environ. Sci.: Processes Impacts · doi:10.1039/c2em30691c · Cited by 400
Mohan Kumar, K., Mandal, B. K., Siva Kumar, K., Sreedhara Reddy, P., & Sreedhar, B. (2013) · Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2012.10.015 · Cited by 358
Environmental transformations and ecological effects of iron-based nanoparticles
Lei, C., Sun, Y., Tsang, D. C. W., & Lin, D. (2018) · Environmental Pollution · doi:10.1016/j.envpol.2017.09.052 · Cited by 347
Iron oxide shell mediated environmental remediation properties of nano zero-valent iron
Mu, Y., Jia, F., Ai, Z., & Zhang, L. (2017) · Environmental Science: Nano · doi:10.1039/c6en00398b · Cited by 337
Synthesis of Fe nanoparticles@graphene composites for environmental applications
Guo, J., Wang, R., Tjiu, W. W., Pan, J., & Liu, T. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.04.065 · Cited by 261
Çelebi, O., Üzüm, Ç., Shahwan, T., & Erten, H. N. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.06.122 · Cited by 257
Gollavelli, G., Chang, C.-C., & Ling, Y.-C. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc300112z · Cited by 255
Shu, H.-Y., Chang, M.-C., Chen, C.-C., & Chen, P.-E. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.08.064 · Cited by 194
Nanotechnology-based water quality management for wastewater treatment
Madhura, L., Singh, S., Kanchi, S., Sabela, M., Bisetty, K., & Inamuddin (2019) · Environmental Chemistry Letters · doi:10.1007/s10311-018-0778-8 · Cited by 167
Metadata
- Authors
- Sohn, K., Kang, S. W., Ahn, S., Woo, M., & Yang, S.-K.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-07-29
- Volume
- 40
- Issue
- 17
- Pages
- 5514-5519
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2063515013
- Cited by
- 294
- References
- 0
- FWCI
- 5.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.