The DOI matches its Crossref record.
Highly Efficient Decomposition of Organic Dyes by Aqueous-Fiber Phase Transfer and in Situ Catalytic Oxidation Using Fiber-Supported Cobalt Phthalocyanine
Abstract
A novel metallophthalocyanine derivative, cobalt tetra (2,4-dichloro-1,3,5-triazine) aminophthalocyanine (Co-TDTAPc), was prepared and immobilized on cellulosic fiber by covalent bond to obtain a supported oxidation catalyst (Co-TDTAPc-F). Co-TDTAPc-F/H202 system based on phase-transfer catalytic oxidation for decomposing dyes, including acid, reactive, and direct dyes, has been investigated thoroughly. Compared to traditional adsorption technologies and advanced oxidation processes (AOPs) for dye treatment, Co-TDTAPc-F/H202 combines the advantages of both and is more efficient and more effective. Azo dyes such as C. I. Acid Red 1 (AR1) can be quickly adsorbed onto/into the fiber from aqueous solution and decomposed in situ simultaneously in the presence of Co-TDTAPc-F and H2O2. It has been found that the reaction process is not affected by the visible light. Furthermore, it turns the negative effect of NaCl normally observed in homogeneous catalysis into positive one. The catalytic reaction can proceed at a wide pH range from acidic to alkaline. In 60 min, more than 98% of AR1 was eliminated at initial pH 2. In 90 min, about 40% of the carbon was found mineralized as determined by the analysis of the residual total organic carbon. The high-performance liquid chromatography result indicated that a substantial amount of the starting AR1 was converted to other organic products, while gas chromatography/mass spectrometry analysis showed the rest of the carbon existed mainly as small molecular biodegradable aliphatic carboxylic compounds such as oxalic acid, malonic acid, and maleic acid, etc. Co-TDTAPc-F is stable, causes no secondary pollution, and remains efficient in repetitive test cycles with no obvious degradation of catalytic activity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review of iron-free Fenton-like systems for activating H2O2 in advanced oxidation processes
Bokare, A. D., & Choi, W. (2014) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.04.054 · Cited by 2,368
Sun, H., Cao, L., & Lu, L. (2011) · Nano Research · doi:10.1007/s12274-011-0111-3 · Cited by 648
Adsorption isotherms and kinetics studies of malachite green on chitin hydrogels
Tang, H., Zhou, W., & Zhang, L. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.01.010 · Cited by 396
Huang, Z., Bao, H., Yao, Y., Lu, W., & Chen, W. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.02.005 · Cited by 383
Self-citationAdsorption capability for Congo red on nanocrystalline MFe2O4 (M = Mn, Fe, Co, Ni) spinel ferrites
Wang, L., Li, J., Wang, Y., Zhao, L., & Jiang, Q. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.10.088 · Cited by 363
Superabsorbent Cellulose–Clay Nanocomposite Hydrogels for Highly Efficient Removal of Dye in Water
Peng, N., Hu, D., Zeng, J., Li, Y., Liang, L., & Chang, C. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02178 · Cited by 338
Magnetic Dendritic Materials for Highly Efficient Adsorption of Dyes and Drugs
Zhou, L., Gao, C., & Xu, W. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100114f · Cited by 328
Recent Advances in Heterogeneous Photocatalytic Decolorization of Synthetic Dyes
Muhd Julkapli, N., Bagheri, S., & Bee Abd Hamid, S. (2014) · The Scientific World Journal · doi:10.1155/2014/692307 · Cited by 280
Alqadami, A. A., Naushad, M., Abdalla, M. A., Khan, M. R., & Alothman, Z. A. (2016) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.6b00446 · Cited by 272
Metadata
- Authors
- Chen, W., Lu, W., Yao, Y., & Xu, M.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-07-31
- Volume
- 41
- Issue
- 17
- Pages
- 6240-6245
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2045513743
- Cited by
- 205
- References
- 0
- FWCI
- 5.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.