The DOI matches its Crossref record.
Radiation Absorption and Optimization of Solar Photocatalytic Reactors for Environmental Applications
Abstract
This study provides a systematic and quantitative approach to the analysis and optimization of solar photocatalytic reactors utilized in environmental applications such as pollutant remediation and conversion of biomass (waste) to hydrogen. Ray tracing technique was coupled with the six-flux absorption scattering model (SFM) to analyze the complex radiation field in solar compound parabolic collectors (CPC) and tubular photoreactors. The absorption of solar radiation represented by the spatial distribution of the local volumetric rate of photon absorption (LVRPA) depends strongly on catalyst loading and geometry. The total radiation absorbed in the reactors, the volumetric rate of absorption (VRPA), was analyzed as a function of the optical properties (scattering albedo) of the photocatalyst. The VRPA reached maxima at specific catalyst concentrations in close agreement with literature experimental studies. The CPC has on average 70% higher photon absorption efficiency than a tubular reactor and requires 39% less catalyst to operate under optimum conditions. The "apparent optical thickness" is proposed as a new dimensionless parameter for optimization of CPC and tubular reactors. It removes the dependence of the optimum catalyst concentration on tube diameter and photocatalyst scattering albedo. For titanium dioxide (TiO(2)) Degussa P25, maximum photon absorption occurs at apparent optical thicknesses of 7.78 for CPC and 12.97 for tubular reactors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Photocatalytic hydrogen production using metal doped TiO2: A review of recent advances
Kumaravel, V., Mathew, S., Bartlett, J., & Pillai, S. C. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.11.080 · Cited by 968
Gong, E., Ali, S., Hiragond, C. B., Kim, H. S., Powar, N. S., Kim, D., Kim, H., & In, S.-I. (2022) · Energy & Environmental Science · doi:10.1039/d1ee02714j · Cited by 805
Gunawan, D., Zhang, J., Li, Q., Toe, C. Y., Scott, J., Antonietti, M., Guo, J., & Amal, R. (2024) · Advanced Materials · doi:10.1002/adma.202404618 · Cited by 325
Prieto-Rodriguez, L., Miralles-Cuevas, S., Oller, I., Agüera, A., Puma, G. L., & Malato, S. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.09.008 · Cited by 252
Self-citationReflection‐refraction effects on light distribution inside tubular photobioreactors
Marotta, G., Pruvost, J., Scargiali, F., Caputo, G., & Brucato, A. (2017) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.22811 · Cited by 15
Metadata
- Authors
- Colina-Márquez, J., Machuca-Martínez, F., & Puma, G. L.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-06-09
- Volume
- 44
- Issue
- 13
- Pages
- 5112-5120
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W1986982916
- Cited by
- 194
- References
- 0
- FWCI
- 6.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.