The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Quantification of Nanoscale Silver Particles Removal and Release from Municipal Wastewater Treatment Plants in Germany
Abstract
The majority of pure silver nanoparticles in consumer products are likely released into sewer systems and usually end up in wastewater treatment plants (WWTPs). Research investigating the reduction in nanoscale silver particles (n-Ag-Ps) has focused on the biological treatment process, generally in controlled laboratory experiments. This study, analyzing the field-collected samples from nine municipal WWTPs in Germany, is the first to evaluate the reduction in n-Ag-Ps by mechanical and biological treatments in sequence in WWTPs. Additionally, the concentration of n-Ag-Ps in effluent was determined through two different methods that are presented here: novel ionic exchange resin (IER) and cloud point extraction (CPE) methods. The n-Ag-Ps concentrations in influent were all low (<1.5 μg/L) and decreased (average removal efficiency of ∼35%) significantly after mechanical treatment, indicating that the mechanical treatment contributes to the n-Ag-Ps removal. Afterward, more than 72% of the remaining n-Ag-Ps in the semi-treated wastewater (i.e., wastewater after mechanical treatment) were reduced by biological treatment. Together, these processes reduced 95% of the n-Ag-Ps that entered WWTPs, which resulted in low concentration of n-Ag-Ps in the effluents (<12 ng/L). For a WWTP with 520,000 t/d treatment capacity, we estimated that the daily n-Ag-Ps load in effluent discharge equated to about 4.4 g/d. Obviously, WWTPs are not potential point sources for n-Ag-Ps in the aquatic environment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kittler, S., Greulich, C., Diendorf, J., Köller, M., & Epple, M. (2010) · Chemistry of Materials · doi:10.1021/cm100023p · Cited by 1,126
Glover, R. D., Miller, J. M., & Hutchison, J. E. (2011) · ACS Nano · doi:10.1021/nn2031319 · Cited by 303
Cited by
Laborda, F., Bolea, E., Cepriá, G., Gómez, M. T., Jiménez, M. S., Pérez-Arantegui, J., & Castillo, J. R. (2016) · Analytica Chimica Acta · doi:10.1016/j.aca.2015.11.008 · Cited by 378
De la Calle, I., Menta, M., & Séby, F. (2016) · Spectrochimica Acta Part B: Atomic Spectroscopy · doi:10.1016/j.sab.2016.09.007 · Cited by 99
Metadata
- Authors
- Li, L., Hartmann, G., Döblinger, M., & Schuster, M.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-06-20
- Volume
- 47
- Issue
- 13
- Pages
- 7317-7323
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W1994452425
- Cited by
- 200
- References
- 2
- FWCI
- 9.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.