Centennial Evolution of Aluminum In-Use Stocks on Our Aluminized Planet
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
A dynamic material flow model was developed to simulate the evolution of global aluminum stocks in geological reserve and anthropogenic reservoir from 1900 to 2010 on a country level. The contemporary global aluminum stock in use (0.6 Gt or 90 kg/capita) has reached about 10% of that in known bauxite reserves and represents an embodied energy amount that is equivalent to three-quarters of the present global annual electricity consumption. The largest proportions of in-use stock are located in the U.S. (28%), China (15%), Japan (7%), and Germany (6%) and in sectors of building and construction (40%) and transportation (27%). Industrialized countries have shown similar patterns of aluminum in-use stock growth: once the per-capita stocks have reached a threshold level of 50 kg, they kept a near linear annual growth of 5-10 kg/capita; no clear signs of saturation can yet be observed. The present aluminum in-use stocks vary widely across countries: approximately 100-600 kg/capita in industrialized countries and below 100 kg/capita in developing countries. The growing global aluminum in-use stock has significant implications on future aluminum demand and provides important recycling opportunities that will be critical for greenhouse gas emissions mitigation in the aluminum industry in the coming decades.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Material efficiency: A white paper
Allwood, J. M., Ashby, M. F., Gutowski, T. G., & Worrell, E. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2010.11.002 · Cited by 927
Reusing Steel and Aluminum Components at End of Product Life
Cooper, D. R., & Allwood, J. M. (2012) · Environmental Science & Technology · doi:10.1021/es301093a · Cited by 118
Cited by
Krausmann, F., Wiedenhofer, D., Lauk, C., Haas, W., Tanikawa, H., Fishman, T., Miatto, A., Schandl, H., & Haberl, H. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1613773114 · Cited by 710
“We compared our results with available estimates from studies that have quantified stocks of substances or single materials, including steel (23), aluminum (21), copper (30), carbon in timber and plastics (20), and concrete (6).”
ResultImpacts of booming concrete production on water resources worldwide
Miller, S. A., Horvath, A., & Monteiro, P. J. M. (2018) · Nature Sustainability · doi:10.1038/s41893-017-0009-5 · Cited by 533
Modeling Metal Stocks and Flows: A Review of Dynamic Material Flow Analysis Methods
Müller, E., Hilty, L. M., Widmer, R., Schluep, M., & Faulstich, M. (2014) · Environmental Science & Technology · doi:10.1021/es403506a · Cited by 519
Zeng, A., Chen, W., Rasmussen, K. D., Zhu, X., Lundhaug, M., Müller, D. B., Tan, J., Keiding, J. K., Liu, L., Dai, T., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-29022-z · Cited by 325
Self-citationA review of methods and data to determine raw material criticality
Schrijvers, D., Hool, A., Blengini, G. A., Chen, W.-Q., Dewulf, J., Eggert, R., van Ellen, L., Gauss, R., Goddin, J., Habib, K., et al. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104617 · Cited by 324
Self-citation
Metadata
- Authors
- Liu, G., & Müller, D. B.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-04-04
- Volume
- 47
- Issue
- 9
- Pages
- 4882-4888
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2317699613
- Cited by
- 144
- References
- 2
- FWCI
- 8.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Centennial Evolution of Aluminum In-Use Stocks on Our Aluminized Planet. https://app.cochat.ai/papers/10.1021/es305108p
- The paper
- Liu, G., & Müller, D. B. (2013). Centennial Evolution of Aluminum In-Use Stocks on Our Aluminized Planet. Environmental Science & Technology. https://doi.org/10.1021/es305108p
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.