Speciation of Sulfur in Biochar Produced from Pyrolysis and Gasification of Oak and Corn Stover
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The effects of feedstock type and biomass conversion conditions on the speciation of sulfur in biochars are not well-known. In this study, the sulfur content and speciation in biochars generated from pyrolysis and gasification of oak and corn stover were determined. We found the primary determinant of the total sulfur content of biomass to be the feedstock from which the biochar is generated, with oak and corn stover biochars containing 160 and 600-800 ppm sulfur, respectively. In contrast, for sulfur speciation, we found the primary determinant to be the temperature combined with the thermochemical conversion method. The speciation of sulfur in biochars was determined using X-ray absorption near-edge structure (XANES), ASTM method D2492, and scanning electron microscopy-energy-dispersive spectroscopy (SEM-EDS). Biochars produced under pyrolysis conditions at 500-600 °C contain sulfate, organosulfur, and sulfide. In some cases, the sulfate contents are up to 77-100%. Biochars produced in gasification conditions at 850 °C contain 73-100% organosulfur. The increase of the organosulfur content as the temperature of biochar production increases suggests a similar sulfur transformation mechanism as that in coal, where inorganic sulfur reacts with hydrocarbon and/or H2 to form organosulfur when the coal is heated. EDS mapping of a biochar produced from corn stover pyrolysis shows individual sulfur-containing mineral particles in addition to the sulfur that is distributed throughout the organic matrix.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dynamic Molecular Structure of Plant Biomass-Derived Black Carbon (Biochar)
Keiluweit, M., Nico, P. S., Johnson, M. G., & Kleber, M. (2010) · Environmental Science & Technology · doi:10.1021/es9031419 · Cited by 3,230 · cited 1×
“…impact of the temperature of biochar production on their properties, such as cation-exchange capacity, aromaticity, and sorption capability, 48 − 50 there have been few studies on the e ff ect of the temperature and feedstocks on the speciation of sulfur and other trace components of the biochar.”
Lehmann, J. (2007) · Nature · doi:10.1038/447143a · Cited by 2,477
Sulfur forms in organic substrates affecting S mineralization in soil
Churka Blum, S., Lehmann, J., Solomon, D., Caires, E. F., & Alleoni, L. R. F. (2013) · Geoderma · doi:10.1016/j.geoderma.2013.02.003 · Cited by 154
Cited by
Ippolito, J. A., Cui, L., Kammann, C., Wrage-Mönnig, N., Estavillo, J. M., Fuertes-Mendizabal, T., Cayuela, M. L., Sigua, G., Novak, J., Spokas, K., et al. (2020) · Biochar · doi:10.1007/s42773-020-00067-x · Cited by 927
Biochar Amendment Improves Crop Production in Problem Soils: A Review
Yu, H., Zou, W., Chen, J., Chen, H., Yu, Z., Huang, J., Tang, H., Wei, X., & Gao, B. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.10.117 · Cited by 675
Lian, F., & Xing, B. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.7b02528 · Cited by 641
Fates of Chemical Elements in Biomass during Its Pyrolysis
Liu, W.-J., Li, W.-W., Jiang, H., & Yu, H.-Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00647 · Cited by 614
Kumar, M., Dutta, S., You, S., Luo, G., Zhang, S., Show, P. L., Sawarkar, A. D., Singh, L., & Tsang, D. C. W. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127143 · Cited by 474
Characterization and quantification of biochar alkalinity
Fidel, R. B., Laird, D. A., Thompson, M. L., & Lawrinenko, M. (2017) · Chemosphere · doi:10.1016/j.chemosphere.2016.09.151 · Cited by 463
Xiang, L., Harindintwali, J. D., Wang, F., Redmile-Gordon, M., Chang, S. X., Fu, Y., He, C., Muhoza, B., Brahushi, F., Bolan, N., et al. (2022) · Environmental Science & Technology · doi:10.1021/acs.est.2c02976 · Cited by 450
You, S., Ok, Y. S., Chen, S. S., Tsang, D. C. W., Kwon, E. E., Lee, J., & Wang, C.-H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.06.177 · Cited by 421
Niazi, N. K., Bibi, I., Shahid, M., Ok, Y. S., Burton, E. D., Wang, H., Shaheen, S. M., Rinklebe, J., & Lüttge, A. (2018) · Environmental Pollution · doi:10.1016/j.envpol.2017.09.051 · Cited by 392
Rafiq, M. K., Bachmann, R. T., Rafiq, M. T., Shang, Z., Joseph, S., & Long, R. (2016) · PLOS ONE · doi:10.1371/journal.pone.0156894 · Cited by 376
“[45] A van Krevelen plot summarizing original and carbonized corn stover produced by various research groups worldwide under different process conditions is shown in Fig 4.[16,17,18,25,26,27,28,34,46,47] Overall the hydrogen and oxygen content decreases with increasing temperature suggesting a greater hydrophobicity o…”
BackgroundAdvances and future directions of biochar characterization methods and applications
Igalavithana, A. D., Mandal, S., Niazi, N. K., Vithanage, M., Parikh, S. J., Mukome, F. N. D., Rizwan, M., Oleszczuk, P., Al-Wabel, M., Bolan, N., et al. (2017) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2017.1421844 · Cited by 321
Shen, Y., Linville, J. L., Urgun-Demirtas, M., Schoene, R. P., & Snyder, S. W. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.016 · Cited by 310
Review of biochar role as additive in anaerobic digestion processes
Chiappero, M., Norouzi, O., Hu, M., Demichelis, F., Berruti, F., Di Maria, F., Mašek, O., & Fiore, S. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110037 · Cited by 294
Recent Advances in Biochar Production, Characterization, and Environmental Applications
Varkolu, M., Gundekari, S., Omvesh, Palla, V. C. S., Kumar, P., Bhattacharjee, S., & Vinodkumar, T. (2025) · Catalysts · doi:10.3390/catal15030243 · Cited by 154
Uroić Štefanko, A., & Leszczynska, D. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.00138 · Cited by 92
Biochar and nitrate reduce risk of methylmercury in soils under straw amendment
Zhang, Y., Liu, Y.-R., Lei, P., Wang, Y.-J., & Zhong, H. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.11.106 · Cited by 73
Shu, R., Dang, F., & Zhong, H. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2015.11.037 · Cited by 68
Piash, M. I., Hossain, M. F., & Parveen, Z. (2017) · Bangladesh Journal of Scientific Research · doi:10.3329/bjsr.v29i2.32327 · Cited by 25
“Biochar’s alkalinity can be attributed to four broad categories: surface organic functional groups, carbonates, soluble organic compounds and other inorganic alkalis including oxides, hydroxides, sulfates, sulfides, and orthophosphates (Cheah et al. 2014).”
BackgroundLebrun Thauront, J., Soja, G., Schmidt, H., & Abiven, S. (2024) · GCB Bioenergy · doi:10.1111/gcbb.13170 · Cited by 15
“This large spread in pyrolysis conditions likely reflects the diversity of pyrolysis technology used, from traditional kilns (Tintner et al., 2020) to continuous fluidized bed re-actors (Brewer et al., 2009, 2012; Cheah et al., 2014; Kim et al., 2012; Lee et al., 2010).”
Metadata
- Authors
- Cheah, S., Malone, S. C., & Feik, C. J.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-07-08
- Volume
- 48
- Issue
- 15
- Pages
- 8474-8480
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2024050834
- Cited by
- 155
- References
- 3
- FWCI
- 4.80
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.