The DOI matches its Crossref record.
Analysis and Improvement of a Scaled-Up and Stacked Microbial Fuel Cell
Open accessAbstract
Scaling up microbial fuel cells (MFCs) is inevitable when power outputs have to be obtained that can power electrical devices other than small sensors. This research has used a bipolar plate MFC stack of four cells with a total working volume of 20 L and a total membrane surface area of 2 m(2). The cathode limited MFC performance due to oxygen reduction rate and cell reversal. Furthermore, residence time distribution curves showed that bending membranes resulted in flow paths through which the catholyte could flow from inlet to outlet, while leaving the reactants unconverted. The cathode was improved by decreasing the pH, purging pure oxygen, and increasing the flow rate, which resulted in a 13-fold power density increase to 144 W m(-3) and a volumetric resistivity of only 1.2 mOmega m(3) per cell. Both results are major achievements compared to results currently published for laboratory and scaled-up MFCs. When designing a scaled-up MFC, it is important to ensure optimal contact between electrodes and substrate and to minimize the distances between electrodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Membrane-based processes for sustainable power generation using water
Logan, B. E., & Elimelech, M. (2012) · Nature · doi:10.1038/nature11477 · Cited by 1,644
Nanotechnology‐Enabled Energy Harvesting for Self‐Powered Micro‐/Nanosystems
Wang, Z. L., & Wu, W. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201656 · Cited by 1,063
Towards sustainable wastewater treatment by using microbial fuel cells-centered technologies
Li, W.-W., Yu, H.-Q., & He, Z. (2013) · Energy Environ. Sci. · doi:10.1039/c3ee43106a · Cited by 906
Microbial fuel cells: An overview of current technology
Slate, A. J., Whitehead, K. A., Brownson, D. A. C., & Banks, C. E. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.09.044 · Cited by 725
Overview on the developments of microbial fuel cells
Oliveira, V. B., Simões, M., Melo, L. F., & Pinto, A. M. F. R. (2013) · Biochemical Engineering Journal · doi:10.1016/j.bej.2013.01.012 · Cited by 366
Light energy to bioelectricity: photosynthetic microbial fuel cells
Rosenbaum, M., He, Z., & Angenent, L. T. (2010) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2010.03.010 · Cited by 356
Increasing power generation for scaling up single-chamber air cathode microbial fuel cells
Cheng, S., & Logan, B. E. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.12.104 · Cited by 331
New applications and performance of bioelectrochemical systems
Hamelers, H. V. M., Ter Heijne, A., Sleutels, T. H. J. A., Jeremiasse, A. W., Strik, D. P. B. T. B., & Buisman, C. J. N. (2010) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-009-2357-1 · Cited by 293
Self-citationMcCormick, A. J., Bombelli, P., Scott, A. M., Philips, A. J., Smith, A. G., Fisher, A. C., & Howe, C. J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01965a · Cited by 266
Metadata
- Authors
- Dekker, A., Heijne, A. T., Saakes, M., Hamelers, H. V. M., & Buisman, C. J. N.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-09-23
- Volume
- 43
- Issue
- 23
- Pages
- 9038-9042
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2040165487
- Cited by
- 225
- References
- 0
- FWCI
- 13.28
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.