Emission Rates of Formaldehyde from Materials and Consumer Products Found in California Homes
The DOI matches its Crossref record.
Abstract
Formaldehyde (HCHO) is a toxic air contaminant released indoors from pressed-wood materials and numerous consumer products. Formaldehyde emission data are needed for modeling of indoor personal exposures, health risks, and risk reduction measures. This study determined HCHO emission rates from 55 diverse materials and consumer products under two realistic chamber test conditions, using both time-integrated and continuous real-time measurements. Among dry products, relatively high emissions were found from bare pressed-wood materials made with urea-formaldehyde (UF) resins, and from new (unwashed) permanent press fabrics. UF materials with paper, vinyl, laminate, and other coatings showed HCHO emissions lower by about a factor of 10 than those from bare UF materials. Among wet products, an acid-cured floor finish showed the highest HCHO emissions, greatly exceeding those of any dry product even 24 h after application. Fingernail polish and hardener showed relatively high emission rates, and latex paint and wallpaper relatively low emission rates, but these products emit similar amounts of HCHO because of widely different surface areas of application. Acid-cured finishes, and personal activity patterns and exposures during application of wet products, are key areas for further study.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Formaldehyde in the Indoor Environment
Salthammer, T., Mentese, S., & Marutzky, R. (2010) · Chemical Reviews · doi:10.1021/cr800399g · Cited by 1,808
Changes in indoor pollutants since the 1950s
Weschler, C. J. (2009) · Atmospheric Environment · doi:10.1016/j.atmosenv.2008.09.044 · Cited by 669
Volatile Organic Compounds in Small- and Medium-Sized Commercial Buildings in California
Wu, X. (., Apte, M. G., Maddalena, R., & Bennett, D. H. (2011) · Environmental Science & Technology · doi:10.1021/es202132u · Cited by 97
Biotechnology Progress for Removal of Indoor Gaseous Formaldehyde
Shao, Y., Wang, Y., Zhao, R., Chen, J., Zhang, F., Linhardt, R. J., & Zhong, W. (2020) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-020-10514-1 · Cited by 76
Measured Concentrations of VOCs in Several Non-Residential Microenvironments in the United States
Loh, M. M., Houseman, E. A., Gray, G. M., Levy, J. I., Spengler, J. D., & Bennett, D. H. (2006) · Environmental Science & Technology · doi:10.1021/es060197g · Cited by 71
Effect of outside air ventilation rate on volatile organic compound concentrations in a call center
Hodgson, A. T., Faulkner, D., Sullivan, D. P., DiBartolomeo, D. L., Russell, M. L., & Fisk, W. J. (2003) · Atmospheric Environment · doi:10.1016/j.atmosenv.2003.09.028 · Cited by 71
Fazli, T., & Stephens, B. (2018) · Building and Environment · doi:10.1016/j.buildenv.2018.03.047 · Cited by 35
Metadata
- Authors
- Kelly, T. J., Smith, D. L., & Satola, J.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 1998-11-07
- Volume
- 33
- Issue
- 1
- Pages
- 81-88
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2067811800
- Cited by
- 201
- References
- 0
- FWCI
- 2.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.