The DOI matches its Crossref record.
New Method for the Direct Determination of Dissolved Fe(III) Concentration in Acid Mine Waters
Abstract
A new method for direct determination of dissolved Fe(III) in acid mine water has been developed. In most present methods, Fe(III) is determined by computing the difference between total dissolved Fe and dissolved Fe(II). For acid mine waters, frequently Fe(II) ≫ Fe(III); thus, accuracy and precision are considerably improved by determining Fe(III) concentration directly. The new method utilizes two selective ligands to stabilize Fe(III) and Fe(II), thereby preventing changes in Fe reduction−oxidation distribution. Complexed Fe(II) is cleanly removed using a silica-based, reversed-phase adsorbent, yielding excellent isolation of the Fe(III) complex. Iron(III) concentration is measured colorimetrically or by graphite furnace atomic absorption spectrometry (GFAAS). The method requires inexpensive commercial reagents and simple procedures that can be used in the field. Calcium(II), Ni(II), Pb(II), Al(III), Zn(II), and Cd(II) cause insignificant colorimetric interferences for most acid mine waters. Waters containing >20 mg of Cu/L could cause a colorimetric interference and should be measured by GFAAS. Cobalt(II) and Cr(III) interfere if their molar ratios to Fe(III) exceed 24 and 5, respectively. Iron(II) interferes when its concentration exceeds the capacity of the complexing ligand (14 mg/L). Because of the GFAAS elemental specificity, only Fe(II) is a potential interferent in the GFAAS technique. The method detection limit is 2 μg/L (40 nM) using GFAAS and 20 μg/L (0.4 μM) by colorimetry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Iron-oxide crystallinity increases during soil redox oscillations
Thompson, A., Chadwick, O. A., Rancourt, D. G., & Chorover, J. (2006) · Geochimica et Cosmochimica Acta · doi:10.1016/j.gca.2005.12.005 · Cited by 415
Acero, P., Ayora, C., Torrentó, C., & Nieto, J.-M. (2006) · Geochimica et Cosmochimica Acta · doi:10.1016/j.gca.2006.06.1367 · Cited by 372
Geochemical study of arsenic release mechanisms in the Bengal Basin groundwater
Dowling, C. B., Poreda, R. J., Basu, A. R., Peters, S. L., & Aggarwal, P. K. (2002) · Water Resources Research · doi:10.1029/2001wr000968 · Cited by 311
Acid mine drainage biogeochemistry at Iron Mountain, California
Druschel, G. K., Baker, B. J., Gihring, T. M., & Banfield, J. F. (2004) · Geochemical Transactions · doi:10.1186/1467-4866-5-13 · Cited by 272
Verplanck, P. L., Taylor, H. E., Nordstrom, D. K., & Barber, L. B. (2005) · Environmental Science & Technology · doi:10.1021/es048456u · Cited by 162
Self-citationYang, Z., Yan, Y., Yu, A., Pan, B., & Pignatello, J. J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123592 · Cited by 81
Acero, P., Ayora, C., & Carrera, J. (2007) · Geochimica et Cosmochimica Acta · doi:10.1016/j.gca.2007.09.007 · Cited by 53
Inskeep, W. P., Jay, Z. J., McKay, L. J., & Dlakić, M. (2025) · Nature Communications · doi:10.1038/s41467-024-55079-z · Cited by 9
Metadata
- Authors
- To, T. B., Nordstrom, D. K., Cunningham, K. M., Ball, J. W., & McCleskey, R. B.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 1999-01-22
- Volume
- 33
- Issue
- 5
- Pages
- 807-813
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2033417901
- Cited by
- 167
- References
- 0
- FWCI
- 3.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.