The DOI matches its Crossref record.
Trace Analysis of Fragrance Materials in Wastewater and Treated Wastewater
Abstract
An analytical method was developed and used to measure trace levels of fragrance materials (FMs) in municipal wastewater and treated wastewater. Sixteen FMs were selected as analytes because of their wide range of physical chemical properties. The analytical method included the use of nine perdeuterated FMs as internal standards, a high-flow C 18 speed disk for the extraction of FMs from aqueous matrices, and an accelerated solvent extraction system for the extraction of FMs from solid matrices. For aqueous matrices, average FM recoveries (relative to the perdeuterated FM internal standard) were 97−115%, with limits of quantitation ranging from 0.5 to 35 ng/L. For activated sludge solids and primary influent solids, the average FM recovery from the extraction procedure was 81%. Concentrations and removal of FMs at an activated sludge and a trickling filter wastewater treatment plant were determined in the U.S. FM influent concentrations ranged from 0.3 to 154 μg/L, while FM effluent concentrations ranged from 0.005 to 1.7 μg/L. FM removal, following secondary treatment, ranged from 80 to 99.9%, depending on the type of treatment and the fragrance material physical chemical properties and biodegradability. In general, the activated sludge plant had higher removals of FMs than the trickling filter plant. Although acceptable environmental risk assessments have been developed for several of these FMs, these and future environmental risk assessments can be refined and improved using this analytical method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A framework for prioritizing fragrance materials for aquatic risk assessment
Salvito, D. T., Senna, R. J., & Federle, T. W. (2002) · Environmental Toxicology and Chemistry · doi:10.1002/etc.5620210627 · Cited by 1,891
Occurrence and Fate of Pharmaceuticals and Personal Care Products (PPCPs) in Biosolids
Xia, K., Bhandari, A., Das, K., & Pillar, G. (2005) · Journal of Environmental Quality · doi:10.2134/jeq2005.0091 · Cited by 293
Peck, A. M. (2006) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-006-0728-3 · Cited by 254
Basheer, C., Vetrichelvan, M., Valiyaveettil, S., & Lee, H. K. (2007) · Journal of Chromatography A · doi:10.1016/j.chroma.2006.11.008 · Cited by 55
Metadata
- Authors
- Simonich, S. L., Begley, W. M., Debaere, G., & Eckhoff, W. S.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-02-08
- Volume
- 34
- Issue
- 6
- Pages
- 959-965
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2047114090
- Cited by
- 173
- References
- 0
- FWCI
- 13.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Trace Analysis of Fragrance Materials in Wastewater and Treated Wastewater. https://app.cochat.ai/papers/10.1021/es991018g
- The paper
- Simonich, S. L., Begley, W. M., Debaere, G., & Eckhoff, W. S. (2000). Trace Analysis of Fragrance Materials in Wastewater and Treated Wastewater. Environmental Science & Technology. https://doi.org/10.1021/es991018g
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.