The DOI matches its Crossref record.
Application of Mechanosynthesized Azine-Decorated Zinc(II) Metal–Organic Frameworks for Highly Efficient Removal and Extraction of Some Heavy-Metal Ions from Aqueous Samples: A Comparative Study
Abstract
The three zinc(II) metal-organic frameworks [Zn2(oba)2(4-bpdb)]·(DMF)x (TMU-4), [Zn(oba)(4-bpdh)0.5]n·(DMF)y (TMU-5), and [Zn(oba)(4-bpmb)0.5]n·(DMF)z (TMU-6) [DMF = dimethylformamide, H2oba = 4,4'-oxybisbenzoic acid, 4-bpdb = 1,4-bis(4-pyridyl)-2,3-diaza-1,3-butadiene, 4-bpdh = 2,5-bis(4-pyridyl)-3,4-diaza-2,4-hexadiene, and 4-bpmb = N(1),N(4)-bis((pyridin-4-yl)methylene)benzene-1,4-diamine], which contain azine-functionalized pores, have been successfully synthesized by mechanosynthesis as a convenient, rapid, low-cost, solventless, and green process. These MOFs were studied for the removal and extraction of some heavy-metal ions from aqueous samples, and the effects of the basicity and void space of these MOFs on adsorption efficiency were evaluated. The results showed that, for trace amounts of metal ions, the basicity of the N-donor ligands in the MOFs determines the adsorption efficiency of the MOFs for the metal ions. In contrast, at high concentrations of metal ions, the void space of the MOFs plays a main role in the adsorption process. The studies conducted revealed that, among the three MOFs, TMU-6 had a lower adsorption efficiency for metal ions than the other two MOFs. This result can be attributed to the greater basicity of the azine groups on the TMU-4 and TMU-5 pore walls as compared to the imine groups on the N-donor ligands on the TMU-6 pore walls. Subsequently, TMU-5 was chosen as an efficient sorbent for the extraction and preconcentration of trace amounts of some heavy-metal ions including Cd(II), Co(II), Cr(III), Cu(II), and Pb(II), followed by their determination by flow injection inductively coupled plasma optical emission spectrometry. Several variables affecting the extraction efficiency of the analytes were investigated and optimized. The optimized methodology exhibits a good linearity between 0.05 and 100 μg L(-1) (R(2) > 0.9935) and detection limits in the range of 0.01-1.0 μg L(-1). The method has enhancement factors between 42 and 225 and relative standard deviations (RSDs) of 2.9-6.2%. Subsequently, the potential applicability of the proposed method was evaluated for the extraction and determination of target metal ions in some environmental water samples.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Li, J., Wang, X., Zhao, G., Chen, C., Chai, Z., Alsaedi, A., Hayat, T., & Wang, X. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00543a · Cited by 1,856
Metal–organic frameworks for heavy metal removal from water
Kobielska, P. A., Howarth, A. J., Farha, O. K., & Nayak, S. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.12.010 · Cited by 1,014
Application of metal and metal oxide nanoparticles@MOFs
Falcaro, P., Ricco, R., Yazdi, A., Imaz, I., Furukawa, S., Maspoch, D., Ameloot, R., Evans, J. D., & Doonan, C. J. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.08.002 · Cited by 620
Feng, M., Zhang, P., Zhou, H.-C., & Sharma, V. K. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.06.114 · Cited by 493
Metal–organic framework technologies for water remediation: towards a sustainable ecosystem
Mon, M., Bruno, R., Ferrando-Soria, J., Armentano, D., & Pardo, E. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta00264a · Cited by 480
Metadata
- Authors
- Tahmasebi, E., Masoomi, M. Y., Yamini, Y., & Morsali, A.
- Venue
- Inorganic Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-12-30
- Volume
- 54
- Issue
- 2
- Pages
- 425-433
- ISSN
- 0020-1669 (ISSN-L)
- 1520-510X
- OpenAlex
- W2314126842
- Cited by
- 238
- References
- 0
- FWCI
- 8.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Application of Mechanosynthesized Azine-Decorated Zinc(II) Metal–Organic Frameworks for Highly Efficient Removal and Extraction of Some Heavy-Metal Ions from Aqueous Samples: A Comparative Study. https://app.cochat.ai/papers/10.1021/ic5015384
- The paper
- Tahmasebi, E., Masoomi, M. Y., Yamini, Y., & Morsali, A. (2015). Application of Mechanosynthesized Azine-Decorated Zinc(II) Metal–Organic Frameworks for Highly Efficient Removal and Extraction of Some Heavy-Metal Ions from Aqueous Samples: A Comparative Study. Inorganic Chemistry. https://doi.org/10.1021/ic5015384
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.