The DOI matches its Crossref record.
Separation of Xylene Isomer Vapors with Oriented MFI Membranes Made by Seeded Growth
Abstract
Oriented MFI membranes made by secondary growth on the surface of α-Al 2 O 3 support disks have been evaluated for the separation of xylene isomers vapors in the temperature range 22−275 °C and feed partial pressures up to ∼0.7−0.9 kPa. It is found that the separation performance of these membranes is directly related to the synthesis conditions and the resulting membrane microstructure. Thick (12−18 μm) and c -oriented membranes (type A membranes) made by 24-h growth at 175 °C exhibit single-component p -xylene/ o -xylene permselectivity as high as 150 at 100 °C but very modest separation factors (usually <5) are obtained with binary feed mixtures, a result of a drastic increase in the flux of o -xylene in the presence of p -xylene. Thin (2−3 μm) and ( h 0 h )-oriented membranes (type B membranes) made by 120-h growth at 90 °C exhibit comparable single-component and binary permeation behavior but suffer from lower selectivities/separation factors (up to 12) as a result of cracks formed after calcination for template removal. It is found that the addition of n -hexane in a binary p -xylene/ o -xylene feed in the case of type A membranes or the dip-coating of type B membranes with a surfactant-templated silica sol results in a considerable improvement of mixture separation factors up to 60 or 30−300, respectively. This improvement is attributed to preferrential adsorption of n -hexane in nonzeolitic micropores/grain boundaries in the case of type A membranes or to selective sealing of cracks by mesostructured silica in the case of type B membranes. Both type A and type B membranes exhibit, at 100−125 °C, p -xylene permeance [(2−5) × 10 -8 mol m -2 s -1 Pa -1 ] and p -xylene/ o -xylene separation factors (60−300) that are comparable to or higher than the values reported for other MFI membranes in the literature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ordered porous materials for emerging applications
Davis, M. E. (2002) · Nature · doi:10.1038/nature00785 · Cited by 5,308
Microstructural Optimization of a Zeolite Membrane for Organic Vapor Separation
Lai, Z., Bonilla, G., Diaz, I., Nery, J. G., Sujaoti, K., Amat, M. A., Kokkoli, E., Terasaki, O., Thompson, R. W., Tsapatsis, M., et al. (2003) · Science · doi:10.1126/science.1082169 · Cited by 1,093
Self-citationZeolite membranes – Recent developments and progress
Caro, J., & Noack, M. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.03.008 · Cited by 724
Ultra-selective high-flux membranes from directly synthesized zeolite nanosheets
Jeon, M. Y., Kim, D., Kumar, P., Lee, P. S., Rangnekar, N., Bai, P., Shete, M., Elyassi, B., Lee, H. S., Narasimharao, K., et al. (2017) · Nature · doi:10.1038/nature21421 · Cited by 574
Self-citationZeolite based films, membranes and membrane reactors: Progress and prospects
McLeary, E. E., Jansen, J. C., & Kapteijn, F. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.10.050 · Cited by 460
Metadata
- Authors
- Xomeritakis, G., Lai, Z., & Tsapatsis, M.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-12-20
- Volume
- 40
- Issue
- 2
- Pages
- 544-552
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2048010782
- Cited by
- 246
- References
- 0
- FWCI
- 22.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Separation of Xylene Isomer Vapors with Oriented MFI Membranes Made by Seeded Growth. https://app.cochat.ai/papers/10.1021/ie000613k
- The paper
- Xomeritakis, G., Lai, Z., & Tsapatsis, M. (2001). Separation of Xylene Isomer Vapors with Oriented MFI Membranes Made by Seeded Growth. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie000613k
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.