The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Structure and Properties of Regenerated Cellulose Films Prepared from Cotton Linters in NaOH/Urea Aqueous Solution
Abstract
Regenerated cellulose (RC) films having various viscosity-average molecular weights ( M η ) ranging from 2.2 × 10 4 to 8.2 × 10 4 g/mol were prepared from cotton linters in 6 wt % NaOH/4 wt % urea aqueous solution by coagulation with 2 M acetic acid and 2% H 2 SO 4 aqueous solution. The dissolution of cellulose and the structure, transparency, and mechanical properties of the RC films were investigated by 13 C NMR, ultraviolet, and infrared spectroscopies; scanning electron microscopy; X-ray diffraction; and a strength test. The RC films exhibited the cellulose II crystalline form and a homogeneous structure with 85% light transmittance at 800 nm. 13 C NMR spectroscopy indicated that the presence of urea in NaOH aqueous solution significantly enhanced the intermolecular hydrogen bonding between cellulose and the solvent, resulting in a higher solubility of cellulose and the complete transition of its crystalline form from I to II. The tensile strength (σ b ) of the RC films in the dry state increased with increasing M η up to 6.0 × 10 4 g/mol and then hardly changed. The values of σ b and the breaking elongation (ε b ) of the RC film having M η = 6.0 × 10 4 g/mol by coagulation with 2% H 2 SO 4 were found to be 106 MPa and 8.0%, respectively, in the dry state and 17.0 MPa and 10.7%, respectively, in the wet state, and the strength was much higher than that of commercially available cellophane. Therefore, a novel and nonpolluting process for the manufacture of cellulose film and fiber from cotton linters in 6 wt % NaOH/4 wt % urea aqueous solution is provided in this work.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Study on the Solubility of Cellulose in Aqueous Alkali Solution by Deuteration IR and 13C NMR
Kamida, K., Okajima, K., Matsui, T., & Kowsaka, K. (1984) · Polymer Journal · doi:10.1295/polymj.16.857 · Cited by 177
Cited by
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Hydrogels based on cellulose and chitin: fabrication, properties, and applications
Shen, X., Shamshina, J. L., Berton, P., Gurau, G., & Rogers, R. D. (2016) · Green Chemistry · doi:10.1039/c5gc02396c · Cited by 669
Transparent paper: fabrications, properties, and device applications
Zhu, H., Fang, Z., Preston, C., Li, Y., & Hu, L. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43024c · Cited by 550
Xu, A., Wang, J., & Wang, H. (2010) · Green Chem. · doi:10.1039/b916882f · Cited by 439
Dissolution and regeneration of cellulose in NaOH/thiourea aqueous solution
Zhang, L., Ruan, D., & Gao, S. (2002) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10215 · Cited by 319
Self-citationSolution NMR Spectroscopy of Food Polysaccharides
Cheng, H. N., & Neiss, T. G. (2012) · Polymer Reviews · doi:10.1080/15583724.2012.668154 · Cited by 279
Green composite films prepared from cellulose, starch and lignin in room-temperature ionic liquid
Wu, R.-L., Wang, X.-L., Li, F., Li, H.-Z., & Wang, Y.-Z. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.11.044 · Cited by 278
Ye, D., Lei, X., Li, T., Cheng, Q., Chang, C., Hu, L., & Zhang, L. (2019) · ACS Nano · doi:10.1021/acsnano.9b02081 · Cited by 276
Self-citation
Metadata
- Authors
- Zhang, L., Ruan, D., & Zhou, J.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-11-10
- Volume
- 40
- Issue
- 25
- Pages
- 5923-5928
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2033702627
- Cited by
- 227
- References
- 1
- FWCI
- 2.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.