The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Desulfurization of Commercial Liquid Fuels by Selective Adsorption via π-Complexation with Cu(I)−Y Zeolite
Abstract
Desulfurization of commercial gasoline and diesel by a π-complexation adsorbent, Cu(I)−Y zeolite, was studied in a fixed-bed adsorber operated at ambient temperature and pressure. The sulfur contents in the effluents were below (or well below) the detection limit using flame photometric detection (FPD), i.e., below 0.28 ppmw sulfur. Thus, these “sulfur-free” fuels are well suited for fuel cell applications. Furthermore, it is demonstrated that using a thin layer of a guard bed (e.g., activated carbon, AC) could significantly increase the sulfur capacities of the π-complexation sorbent. For a feed gasoline containing 335 ppmw sulfur, Cu(I)−Y produced 14.7 cm 3 of sulfur-free gasoline/g of sorbent. When using AC as a guard bed, 19.6 cm 3 of sulfur-free gasoline/g of combined sorbent was produced. For the case of diesel fuel, 34.3 cm 3 of “sulfur-free” diesel was produced per 1 g of combined sorbent. The π-complexation sorbents have proven to be by far the most sulfur-selective as well as having the highest sulfur capacities. Gas chromatography−FPD results showed that the π-complexation sorbents selectively adsorbed highly substituted thiophenes, benzothiophenes, and dibenzothiophenes from gasoline and diesel, which is not possible by using conventional hydrodesulfurization reactors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorbents: Fundamentals and Applications
Yang, R. T. (2003) · doi:10.1002/047144409x · Cited by 1,182
Self-citationOlefin/paraffin separations by adsorption: π‐Complexation vs. kinetic separation
Rege, S. U., Padin, J., & Yang, R. T. (1998) · AIChE Journal · doi:10.1002/aic.690440405 · Cited by 225
Self-citationNew sorbents for olefin/paraffin separations by adsorption via π ‐complexation
Yang, R. T., & Kikkinides, E. S. (1995) · AIChE Journal · doi:10.1002/aic.690410309 · Cited by 213
Self-citationDeactivation of π-Complexation Adsorbents by Hydrogen and Rejuvenation by Oxidation
Jayaraman, A., Yang, R. T., Munson, C. L., & Chinn, D. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0102753 · Cited by 36
Self-citation
Cited by
Song, C. (2003) · Catalysis Today · doi:10.1016/s0920-5861(03)00412-7 · Cited by 2,018
Recent advances in the science and technology of ultra low sulfur diesel (ULSD) production
Stanislaus, A., Marafi, A., & Rana, M. S. (2010) · Catalysis Today · doi:10.1016/j.cattod.2010.05.011 · Cited by 1,264
Hernández-Maldonado, A. J., Yang, F. H., Qi, G., & Yang, R. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.023 · Cited by 371
Self-citationKhan, N. A., & Jhung, S. H. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.11.070 · Cited by 308
Metadata
- Authors
- Hernández-Maldonado, A. J., & Yang, R. T.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-05-15
- Volume
- 42
- Issue
- 13
- Pages
- 3103-3110
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2083852238
- Cited by
- 225
- References
- 4
- FWCI
- 34.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Desulfurization of Commercial Liquid Fuels by Selective Adsorption via π-Complexation with Cu(I)−Y Zeolite. https://app.cochat.ai/papers/10.1021/ie0301132
- The paper
- Hernández-Maldonado, A. J., & Yang, R. T. (2003). Desulfurization of Commercial Liquid Fuels by Selective Adsorption via π-Complexation with Cu(I)−Y Zeolite. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie0301132
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.