The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Assessment of Model Formulations in the Discrete Particle Simulation of Gas−Solid Flow
Abstract
Discrete particle simulation has been recognized as a useful numerical technique for elucidating the fundamentals of granular matter. For gas−solid two-phase flow in fluidization, such simulations are achieved by combining the discrete flow of the particle phase with the continuum flow of the gas phase. However, differences exist in the actual implementation of this idea in the literature. This paper attempts to rationalize this matter by discussing important aspects including the governing equations in relation to the so-called models A and B, which use different treatments of pressure drop in the well-established two-fluid model, different coupling schemes between the gas and solid phases, and different equations for quantifying the particle−fluid interaction. For the purpose of quantitative analysis, gas fluidization of binary mixtures of particles is simulated with different model formulations, and a comparison of the results in terms of flow pattern and mixing/segregation kinetics shows a significant difference. Physical experiments are then conducted under similar conditions to assess the two model formulations, and the results suggest that the model B treatment is favored. The reason for the difference is also discussed in terms of the particle−fluid interaction force. On this basis, a method to reduce the difference between the two model formulations is proposed and tested.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Cited by
Discrete particle simulation of particulate systems: Theoretical developments
Zhu, H. P., Zhou, Z. Y., Yang, R. Y., & Yu, A. B. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2006.12.089 · Cited by 2,055
Self-citationDiscrete particle simulation of particulate systems: A review of major applications and findings
Zhu, H. P., Zhou, Z. Y., Yang, R. Y., & Yu, A. B. (2008) · Chemical Engineering Science · doi:10.1016/j.ces.2008.08.006 · Cited by 1,473
Self-citationReview of discrete particle modeling of fluidized beds
Deen, N. G., Van Sint Annaland, M., Van der Hoef, M. A., & Kuipers, J. A. M. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2006.08.014 · Cited by 995
Discrete particle simulation of particle–fluid flow: model formulations and their applicability
ZHOU, Z. Y., KUANG, S. B., CHU, K. W., & YU, A. B. (2010) · Journal of Fluid Mechanics · doi:10.1017/s002211201000306x · Cited by 921
Self-citationZhong, W., Yu, A., Liu, X., Tong, Z., & Zhang, H. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.07.010 · Cited by 659
Self-citation
Metadata
- Authors
- Feng, Y. Q., & Yu, A. B.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-11-18
- Volume
- 43
- Issue
- 26
- Pages
- 8378-8390
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2048982902
- Cited by
- 213
- References
- 1
- FWCI
- 4.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.