The DOI matches its Crossref record.
Properties of a Nano CaO/Al2O3 CO2 Sorbent
Abstract
This project studied the properties of nano CaO/Al 2 O 3 as a high-temperature CO 2 sorbent for its use in an adsorption enhanced reforming reaction. The sorbent containing nano CaCO 3 precursors and aluminum oxide was prepared, and evaluation of the CO 2 adsorption properties by a thermogravimetric analyzer, the results show that nano CaO/Al 2 O 3 has a faster decomposition rate and has a higher CO 2 adsorption ratio than micro CaO/Al 2 O 3 . The maximum adsorption ratio occurs at temperatures of 650 °C under a CO 2 partial pressure of 0.33 atm. Durability studies show that the CO 2 adsorption ratio remains at 68.3% after 50 cyclic runs under a carbonation temperature of 650 °C and calcination temperature of 800 °C, respectively. XRD, SEM, and BET were used for studying the change of micro characteristics of the CO 2 sorbents before and after multiple carbonation−calcination runs. The results showed that the pore size of CaO/Al 2 O 3 sorbents was enlarged and that a new substance (Ca 12 Al 14 O 33 ) was formed even under a temperature of 800 °C for the function of keeping the compound stable and durable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
Super-dry reforming of methane intensifies CO 2 utilization via Le Chatelier’s principle
Buelens, L. C., Galvita, V. V., Poelman, H., Detavernier, C., & Marin, G. B. (2016) · Science · doi:10.1126/science.aah7161 · Cited by 528
Dunstan, M. T., Donat, F., Bork, A. H., Grey, C. P., & Müller, C. R. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00100 · Cited by 481
Recent advances in capture of carbon dioxide using alkali-metal-based oxides
Wang, S., Yan, S., Ma, X., & Gong, J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01116b · Cited by 382
Calcium looping sorbents for CO2 capture
Erans, M., Manovic, V., & Anthony, E. J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.074 · Cited by 369
CaO‐Based CO2 Sorbents: From Fundamentals to the Development of New, Highly Effective Materials
Kierzkowska, A. M., Pacciani, R., & Müller, C. R. (2013) · ChemSusChem · doi:10.1002/cssc.201300178 · Cited by 351
Shokrollahi Yancheshmeh, M., Radfarnia, H. R., & Iliuta, M. C. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.060 · Cited by 331
Performance Enhancement of Calcium Oxide Sorbents for Cyclic CO2 Capture—A Review
Liu, W., An, H., Qin, C., Yin, J., Wang, G., Feng, B., & Xu, M. (2012) · Energy & Fuels · doi:10.1021/ef300220x · Cited by 320
Calcium Precursors for the Production of CaO Sorbents for Multicycle CO2 Capture
Liu, W., Low, N. W., Feng, B., Wang, G., & Diniz da Costa, J. C. (2010) · Environmental Science & Technology · doi:10.1021/es902426n · Cited by 272
Metadata
- Authors
- Wu, S. F., Li, Q. H., Kim, J. N., & Yi, K. B.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-11-28
- Volume
- 47
- Issue
- 1
- Pages
- 180-184
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2254426098
- Cited by
- 201
- References
- 0
- FWCI
- 5.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.