The DOI matches its Crossref record.
Controlling the Water Content of Biomass Fast Pyrolysis Oil
Abstract
Several methods to control the water content of pyrolysis oil from fast pyrolysis of biomass were evaluated experimentally. Parameters varied were the operating temperature of the condenser, the gas load of the condenser, and the moisture content of the feedstock. Experiments were performed in a continuous bench scale plant (1 kg/h intake) equipped with a fluidized bed reactor. Pine wood with moisture contents between 0 wt % and 20 wt % (as-received basis) was used as feedstock. The mass balance closure was between 94 wt % and 102 wt %, and the reproducibility of yields of identical experiments was good. Increasing the condenser temperature (15−90 °C) and increasing the gas load (2.0−4.1 kg of gases/kg of vapors in the condenser feed) of the condenser are both well suited to control the water content. However, decreasing the water content by these measures always results in a loss of organic vapors, leading to a lower oil yield in the condenser. Deep drying of the feedstock is beneficial; a lower moisture content of the feed results in less loss of organic vapors for the same water content of pyrolysis oil. Experimental results were compared with the predictions of an equilibrium flash condensation model. Predictions of this equilibrium model are in good agreement with the experimental results. All input parameters of the model (reactor yields and composition of the organics in pyrolysis oil) can be measured, or are known, with sufficient accuracy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil
Abnisa, F., & Wan Daud, W. M. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.007 · Cited by 903
Sewage sludge pyrolysis for liquid production: A review
Fonts, I., Gea, G., Azuara, M., Ábrego, J., & Arauzo, J. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.02.070 · Cited by 592
A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading
Butler, E., Devlin, G., Meier, D., & McDonnell, K. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.035 · Cited by 471
Lignin fast pyrolysis: Results from an international collaboration
Nowakowski, D. J., Bridgwater, A. V., Elliott, D. C., Meier, D., & de Wild, P. (2010) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2010.02.009 · Cited by 412
Challenges and Opportunities for Bio-oil Refining: A Review
Pinheiro Pires, A. P., Arauzo, J., Fonts, I., Domine, M. E., Fernández Arroyo, A., Garcia-Perez, M. E., Montoya, J., Chejne, F., Pfromm, P., & Garcia-Perez, M. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00039 · Cited by 385
Metadata
- Authors
- Westerhof, R. J. M., Kuipers, N. J. M., Kersten, S. R. A., & van Swaaij, W. P. M.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-11-15
- Volume
- 46
- Issue
- 26
- Pages
- 9238-9247
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2051692767
- Cited by
- 180
- References
- 0
- FWCI
- 2.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Controlling the Water Content of Biomass Fast Pyrolysis Oil. https://app.cochat.ai/papers/10.1021/ie070684k
- The paper
- Westerhof, R. J. M., Kuipers, N. J. M., Kersten, S. R. A., & van Swaaij, W. P. M. (2007). Controlling the Water Content of Biomass Fast Pyrolysis Oil. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie070684k
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.