Influence of Water on High-Temperature CO2 Capture Using Layered Double Hydroxide Derivatives
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Mg−Al−CO 3 layered double hydroxide (LDH) was synthesized, and its thermal evolution was investigated using X-ray diffraction FTIR techniques. These patterns revealed the phase transformation of crystalline LDH to a nearly amorphous layered double oxide (LDO). LDOs derived after calcination at 400 °C showed good sorption potential for CO 2, especially in the context of high-temperature CO 2 separation from flue gases. Presence of water in the feed proved to have a positive effect as CO 2 sorption increased from 2.72% (0.61 mmol/g) to 3.14% (0.71 mmol/g) tested at dry- and wet-gas conditions, respectively. CO 2 sorption studies conducted using wet mixed gas (14% CO 2 ) have also shown high sorption capacity even though CO 2 concentration was diluted by almost seven times. Temperature cycling in wet conditions demonstrated high levels (75%) of desorption, which reached an equilibrium value (67%) after initial stabilization. Shorter time cycles (10 min) were found to be more effective in improving the overall efficiency of the process. Regeneration of the LDOs at 400 °C retrieved more than 90% of the original sorption capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Carbon Dioxide onto Hydrotalcite-like Compounds (HTlcs) at High Temperatures
Yong, Z., Mata, & Rodrigues, A. E. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie000238w · Cited by 297
Cited by
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Natural gas origin, composition, and processing: A review
Faramawy, S., Zaki, T., & Sakr, A. A.-E. (2016) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2016.06.030 · Cited by 788
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Metadata
- Authors
- Ram Reddy, M. K., Xu, Z. P., G. Q (Max) Lu, A., & Diniz da Costa, J. C.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-03-13
- Volume
- 47
- Issue
- 8
- Pages
- 2630-2635
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2034885377
- Cited by
- 147
- References
- 1
- FWCI
- 14.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.