The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Renewable Diesel Production from the Hydrotreating of Rapeseed Oil with Pt/Zeolite and NiMo/Al2O3 Catalysts
Abstract
As an alternative way to produce diesel hydrocarbons, the hydrocracking of rapeseed oil was studied on three different types of bifunctional catalysts: Pt/H-Y, Pt/H-ZSM-5, and sulfided NiMo/γ-Al 2 O 3 . Experiments were carried out in a batch reactor over a temperature range of 300−400 °C and initial hydrogen pressures from 5 to 11 MPa. The reaction time was limited to 3 h to prevent a high degree of cracking. The Pt-zeolite catalysts had a strong catalytic activity for both cracking and hydrogenation reactions, and therefore a higher severity was required to reach a relatively high oil conversion into liquid hydrocarbons. With dependence on the activity of the acid sites of the catalysts, the results show a trade-off between the yield of green diesel and the degree of isomerization, which had a direct effect on the cold properties of the diesel. Among the three catalysts, hydrocracking on Ni-Mo/γ-Al 2 O 3 gave the highest yield of liquid hydrocarbons in the boiling range of the diesel fraction, i.e., green diesel, containing mainly n -paraffins from C 15 to C 18, and therefore with poor cold flow properties. While for both zeolitic catalysts, hydrotreating of rapeseed oil produced more iso - than n -paraffins in the boiling range of C 5 to C 22, which included significant amounts of both green diesel and green gasoline. The gas chromatography (GC) analysis of the gaseous phase revealed the presence of mainly CO 2, CO, propane, and remaining hydrogen. It was observed that both pressure and temperature play an important role in the transformation of triglycerides and fatty acids into hydrocarbons.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Huber, G. W., O’Connor, P., & Corma, A. (2007) · Applied Catalysis A: General · doi:10.1016/j.apcata.2007.07.002 · Cited by 637
Cited by
Lin, C. S. K., Pfaltzgraff, L. A., Herrero-Davila, L., Mubofu, E. B., Abderrahim, S., Clark, J. H., Koutinas, A. A., Kopsahelis, N., Stamatelatou, K., Dickson, F., et al. (2013) · Energy & Environmental Science · doi:10.1039/c2ee23440h · Cited by 1,137
Stabilizing Catalytic Pathways via Redundancy: Selective Reduction of Microalgae Oil to Alkanes
Peng, B., Yuan, X., Zhao, C., & Lercher, J. A. (2012) · Journal of the American Chemical Society · doi:10.1021/ja302436q · Cited by 378
Peng, B., Yao, Y., Zhao, C., & Lercher, J. A. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201106243 · Cited by 377
Reaction pathways for the deoxygenation of vegetable oils and related model compounds
Gosselink, R. W., Hollak, S. A. W., Chang, S., van Haveren, J., de Jong, K. P., Bitter, J. H., & van Es, D. S. (2013) · ChemSusChem · doi:10.1002/cssc.201300370 · Cited by 346
Kordulis, C., Bourikas, K., Gousi, M., Kordouli, E., & Lycourghiotis, A. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.07.042 · Cited by 292
Metadata
- Authors
- Sotelo-Boyás, R., Liu, Y., & Minowa, T.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-09-23
- Volume
- 50
- Issue
- 5
- Pages
- 2791-2799
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1977691967
- Cited by
- 224
- References
- 1
- FWCI
- 21.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Renewable Diesel Production from the Hydrotreating of Rapeseed Oil with Pt/Zeolite and NiMo/Al2O3 Catalysts. https://app.cochat.ai/papers/10.1021/ie100824d
- The paper
- Sotelo-Boyás, R., Liu, Y., & Minowa, T. (2011). Renewable Diesel Production from the Hydrotreating of Rapeseed Oil with Pt/Zeolite and NiMo/Al2O3 Catalysts. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie100824d
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.