The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
In Situ Polymerization of Graphene, Graphite Oxide, and Functionalized Graphite Oxide into Epoxy Resin and Comparison Study of On-the-Flame Behavior
Abstract
Starting from expandable graphite (EG), graphene, graphite oxide (GO), and organic phosphate functionalized graphite oxides (FGO) were prepared and incorporated into epoxy resin (EP) matrix via in situ polymerization to prepare EP based composites. The structure of the composites was characterized by transmission electron microscopy to show good dispersion without large aggregates. The thermal behavior investigated by thermogravimetric analysis indicated the EP/graphene composites show the highest onset temperature and maximum weight loss temperature compared with those added with GO and FGO. The flame retardant properties investigated by micro combustion calorimeter illustrate that both EP/graphene and EP/FGO composites perform better than EP/GO composites in flame retardant properties with a maximum reduction of 23.7% in peak-heat release rate when containing 5 wt % FGO and a maximum reduction of 43.9% at 5 wt % loading of graphene. This study represents a new approach to prepare functionalized GO with flame retardant elements to improve the flame retardancy of polymer and gives a way of application of graphene in enhancing thermal stabilities of polymer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
Cited by
The Fabrication, Properties, and Uses of Graphene/Polymer Composites
Du, J., & Cheng, H. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200029 · Cited by 674
Ultrahigh Thermal Conductivity of Assembled Aligned Multilayer Graphene/Epoxy Composite
Li, Q., Guo, Y., Li, W., Qiu, S., Zhu, C., Wei, X., Chen, M., Liu, C., Liao, S., Gong, Y., et al. (2014) · Chemistry of Materials · doi:10.1021/cm501473t · Cited by 351
Self-citation
Metadata
- Authors
- Guo, Y., Bao, C., Song, L., Yuan, B., & Hu, Y.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-05-26
- Volume
- 50
- Issue
- 13
- Pages
- 7772-7783
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2003778303
- Cited by
- 328
- References
- 1
- FWCI
- 19.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.