The DOI matches its Crossref record.
Anodic Dissolution of Pure Aluminum during Electrocoagulation Process: Influence of Supporting Electrolyte, Initial pH, and Current Density
Abstract
In this work, effects of some experimental parameters (supporting electrolyte, initial pH, and current density) on aluminum corrosion and anodic dissolution of aluminum during electrocoagulation process were investigated. Potentiodynamic polarization tests, impedance spectroscopy measurements and potentisotatic current density transients were used to evaluate corrosion parameters and verify effects of supporting electrolyte and initial pH on aluminum corrosion. The presence of NaCl and Na 2 SO 4 shifted the corrosion potential toward more cathodic potentials, indicating that corrosion of aluminum is catalyzed by the presence NaCl and Na 2 SO 4 . On the contrary, the presence of NaH 2 PO 4 increased the corrosion potential, which indicates that the presence of NaH 2 PO 4 inhibits the corrosion of aluminum. Galvanostatic electrolyses demonstrated that measured concentrations of aluminum exceeded theoretical values calculated using Faraday’s Law. The excess in dissolved aluminum produced during galvanostatic electrolyses is primary due to the chemical dissolution of aluminum, which is more significant at highly alkaline conditions. A final pH of value around pH 9 was observed in the presence of NaCl for pH values in the range pH 4–11 which can be explained by buffering effects of aluminum hydroxides.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electrocoagulation process in water treatment: A review of electrocoagulation modeling approaches
Hakizimana, J. N., Gourich, B., Chafi, M., Stiriba, Y., Vial, C., Drogui, P., & Naja, J. (2017) · Desalination · doi:10.1016/j.desal.2016.10.011 · Cited by 908
Environmental impacts and remediation of dye-containing wastewater
Lin, J., Ye, W., Xie, M., Seo, D. H., Luo, J., Wan, Y., & Van der Bruggen, B. (2023) · Nature Reviews Earth & Environment · doi:10.1038/s43017-023-00489-8 · Cited by 900
Ingelsson, M., Yasri, N., & Roberts, E. P. L. (2020) · Water Research · doi:10.1016/j.watres.2020.116433 · Cited by 342
Influencing factors of water electrolysis electrical efficiency
Mazloomi, S. K., & Sulaiman, N. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.03.052 · Cited by 310
Arturi, T. S., Seijas, C. J., & Bianchi, G. L. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e01738 · Cited by 40
Metadata
- Authors
- Mansouri, K., Ibrik, K., Bensalah, N., & Abdel-Wahab, A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-11-02
- Volume
- 50
- Issue
- 23
- Pages
- 13362-13372
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2332056040
- Cited by
- 163
- References
- 0
- FWCI
- 2.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Anodic Dissolution of Pure Aluminum during Electrocoagulation Process: Influence of Supporting Electrolyte, Initial pH, and Current Density. https://app.cochat.ai/papers/10.1021/ie201206d
- The paper
- Mansouri, K., Ibrik, K., Bensalah, N., & Abdel-Wahab, A. (2011). Anodic Dissolution of Pure Aluminum during Electrocoagulation Process: Influence of Supporting Electrolyte, Initial pH, and Current Density. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie201206d
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.