CoChat

Thermal Degradation and Flame Retardance of Biobased Polylactide Composites Based on Aluminum Hypophosphite

Tang, Gang, Wang, Xin, Xing, Weiyi, Zhang, Ping, Wang, Bibo, Hong, Ningning, Yang, Wei, Hu, Yuan, Song, Lei · 2012 · Industrial & Engineering Chemistry Research
Cited by 179

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

A series of flame retardant polylactide composites (FR-PLA) based on aluminum hypophosphite (AHP) were facilely prepared by melt blending method. The thermal behavior, flammability, and mechanical properties of FR-PLA composites were investigated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), the UL-94 vertical burning test, limiting oxygen index (LOI), cone calorimeter testing, microscale combustion calorimetry, mechanical testing, and dynamic mechanical analysis (DMA). TGA results showed that the FR-PLA composites presented higher char residue and reduced mass loss rate than neat PLA. The FR-PLA composite showed excellent fire resistance, from no rating of neat PLA to a V0 rating of FR-PLA containing 20 wt % aluminum hypophosphite in the UL-94 test. The microscale combustion calorimetry test showed that the heat release capacity, the peak of heat release and the total heat release of FR-PLA composites were significantly decreased with the increase of AHP content. The cone calorimeter test also confirmed that the addition of AHP resulted in a significant decrease in the peak heat release rate value of PLA/AHP composites compared with pure PLA. Additionally, the results from DSC and DMA tests indicated that the addition of AHP into polylactide significantly changed the crystallization behavior and storage modulus of polylactide. However, the addition of AHP decreases the tensile strength and elongation at break. The char after LOI testing was investigated by scanning electron microscopy and craterlike morphology was observed on the surface of the char. The thermal degradation process of FR-PLA composites was analyzed by real-time Fourier transform infrared spectroscopy.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ie3008133

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 179

Metadata

Authors
Tang, G., Wang, X., Xing, W., Zhang, P., Wang, B., Hong, N., Yang, W., Hu, Y., & Song, L.
Venue
Industrial & Engineering Chemistry Research
Published
2012-09-05
Volume
51
Issue
37
Pages
12009-12016
ISSN
  • 0888-5885 (ISSN-L)
  • 1520-5045
OpenAlex
W2326631487
Cited by
179
References
1
FWCI
6.54
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.