The DOI matches its Crossref record.
Catalyst Properties and Catalytic Performance of Char from Biomass Gasification
Abstract
Gasification provides a mechanism to convert solids, such as biomass, coal, or waste, into fuels that can be easily integrated into current infrastructure. This paper discusses the use of residual char from a biomass gasifier as a catalyst for tar decomposition and presents an investigation of the catalytic properties of the char. Poplar wood was gasified in a fluidized bed reactor at temperatures ranging from 550 to 920 °C in reaction environments of 90% steam/10% N 2 and 90% N 2 /10% CO 2 . The properties of the char recovered from the process were analyzed, and the catalytic performance for hydrocarbon cracking reactions was tested. Brunauer–Emmett–Teller (BET) measurements showed that the surface area of the char was higher than conventional catalyst carriers. The surface area, which ranged from 429 to 687 m 2 g –1, increased with temperature and reaction time. The catalytic activity of the char was demonstrated through testing the catalytic decomposition of methane and propane to produce H 2 and solid carbon. Higher char surface area resulted in increased performance, but pore size distribution also affected the activity of the catalyst, and evidence of diffusion limitations in microporous char was observed. Clusters of iron were present on the surface of the char. After being used for catalytic applications, carbon deposition was observed on the iron cluster and on the pores of the char, indicating that these sites may influence the reaction. When the char was heated to 800 °C in an inert (N 2 ), atmosphere mass loss was observed, which varied based on the type of char and the time. ESEM/EDX showed that when char was heated to 1000 °C under N 2, oxygen and metals migrated to the surface of the char, which may impact its catalytic activity. Through investigating the properties and performance of biomass gasification char, this paper demonstrates its potential to replace expensive tar decomposition catalysts with char catalysts, which are continuously produced on-site in the gasification process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Lee, J., Kim, K.-H., & Kwon, E. E. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.002 · Cited by 668
Multifunctional applications of biochar beyond carbon storage
Bolan, N., Hoang, S. A., Beiyuan, J., Gupta, S., Hou, D., Karakoti, A., Joseph, S., Jung, S., Kim, K.-H., Kirkham, M. B., et al. (2022) · International Materials Reviews · doi:10.1080/09506608.2021.1922047 · Cited by 638
You, S., Ok, Y. S., Chen, S. S., Tsang, D. C. W., Kwon, E. E., Lee, J., & Wang, C.-H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.06.177 · Cited by 421
Shen, Y. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.11.061 · Cited by 387
Lee, J., Yang, X., Cho, S.-H., Kim, J.-K., Lee, S. S., Tsang, D. C. W., Ok, Y. S., & Kwon, E. E. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.10.092 · Cited by 256
García-Rocha, R., Durón-Torres, S. M., Palomares-Sánchez, S. A., Del Rio-De Santiago, A., Rojas-de Soto, I., & Escalante-García, I. L. (2023) · Materials · doi:10.3390/ma16165571 · Cited by 10
Metadata
- Authors
- Klinghoffer, N. B., Castaldi, M. J., & Nzihou, A.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-09-21
- Volume
- 51
- Issue
- 40
- Pages
- 13113-13122
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2314289865
- Cited by
- 159
- References
- 0
- FWCI
- 2.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.