Adsorption of CO2, CH4, and N2 on 8-, 10-, and 12-Membered Ring Hydrophobic Microporous High-Silica Zeolites: DDR, Silicalite-1, and Beta
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Three hydrophobic microporous high-silica zeolites, DDR (with an 8-membered ring), silicalite-1 (a 10-membered ring), and beta (a 12-membered ring) were synthesized. The Si/Al ratios were 230, 1350, and 35, respectively. The samples were characterized by X-ray diffraction, scanning electron microscopy, thermal gravimetric analysis, water vapor adsorption, and volumetric nitrogen adsorption. They were tested for their CO 2, CH 4, and N 2 adsorption properties at pressures of up to 10 bar at 288–313 K after activation, and the results were correlated with the Langmuir model. The heat of adsorption was calculated using the Clausius–Clapeyron equation based on the adsorption isotherms. These data were used to estimate the separation selectivities for CO 2 /CH 4 and CH 4 /N 2 binary mixtures at 298 K, using the ideal adsorbed solution theory (IAST) model. Experimental results showed that DDR and beta have good selectivities for CO 2 /CH 4, because they have narrow pores (DDR) or more balance metal ions (relatively low Si/Al ratios beta) effect separately. The synthesized silicalite-1 has the lowest S CO2/CH4 but has the most suitable orifices for methane adsorption and the highest S CH4/N2 . In addition, the breakthrough data for CH 4 /N 2 mixtures further indicates that silicalite-1 is more suitable for the CH 4 enrichment than the commercially used sorbents zeolite-5A and 13X. From the reproducibility of CH 4 and N 2 adsorption isotherms on silicalite-1, we can infer that which has the potential to be a commercial sorbent by the stable adsorption properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorbents: Fundamentals and Applications
Yang, R. T. (2003) · doi:10.1002/047144409x · Cited by 1,182
Cited by
Utilization of zeolites as CO2 capturing agents: Advances and future perspectives
Kumar, S., Srivastava, R., & Koh, J. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101251 · Cited by 405
Harnessing Filler Materials for Enhancing Biogas Separation Membranes
Chuah, C. Y., Goh, K., Yang, Y., Gong, H., Li, W., Karahan, H. E., Guiver, M. D., Wang, R., & Bae, T.-H. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00091 · Cited by 339
Separation and Purification of Hydrocarbons with Porous Materials
Wu, Y., & Weckhuysen, B. M. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202104318 · Cited by 284
Zhang, Y., Zhang, P., Yu, W., Wang, J., Deng, Q., Yang, J., Zeng, Z., Xu, M., & Deng, S. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b02139 · Cited by 30
Self-citationComputational evaluation of aluminophosphate zeotypes for CO 2 /N 2 separation
Fischer, M. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp03841k · Cited by 18
Metadata
- Authors
- Yang, J., Li, J., Wang, W., Li, L., & Li, J.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-12-06
- Volume
- 52
- Issue
- 50
- Pages
- 17856-17864
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1980543239
- Cited by
- 137
- References
- 1
- FWCI
- 3.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.