Poly(l-lactic acid)-block-poly(butylene succinate-co-butylene adipate) Multiblock Copolymers: From Synthesis to Thermo-Mechanical Properties
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Multiblock copolymers poly( l -lactic acid)-block-poly(butylene succinate-co-butylene adipate)s (abbr. P(LLA-mb-BSA)s) are synthesized via a polycondensation/chain extension/coupling method using binary chain extenders. A poly( l -lactic acid) (PLLA) prepolymer synthesized via direct melt polycondensation of l -lactic acid is rapidly chain extended with a bis (2-oxazoline) to form hydroxyl terminated dimer, and the dimer is then chain extended/coupled with a hydroxyl terminated poly(butylene succinate-co-butylene adipate) (PBSA) prepolymer by a diisocyanate. The microstructure is characterized with GPC, 1 H NMR and FTIR, and the thermo-mechanical properties are investigated with DSC, TGA, DMA, tensile, and impact testing. In the copolymers, the PLLA hard segments are crystallizable and the PBSA soft segments are amorphous, and only melting of PLLA segment was detected. Two independent glass transitions corresponding to both segments are observed, suggesting incompatibility between the two kinds of segments. The tensile modulus and strength decrease while the elongation at break and impact strength increase with increasing the weight percentage of PBSA segment (ϕ w,PBSA ). The mechanical properties can be tuned in wide range by ϕ w,PBSA, from toughened thermoplastics with excellent tensile modulus, strength and impact strength to thermoplastic elastomers with high elongation at break.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Designing biodegradable multiblock PCL/PLA thermoplastic elastomers
Cohn, D., & Hotovely Salomon, A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.07.052 · Cited by 355
Huang, M.-H., Li, S., & Vert, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.054 · Cited by 222
Wu, L., Jin, C., & Sun, X. (2011) · Biomacromolecules · doi:10.1021/bm1012162 · Cited by 161
Self-citationSynthesis, characterization and degradation of ABA block copolymer of l-lactide and ε-caprolactone
Qian, H., Bei, J., & Wang, S. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00031-8 · Cited by 152
Cited by
Strategies for the synthesis of block copolymers with biodegradable polyester segments
Diaz, C., & Mehrkhodavandi, P. (2021) · Polymer Chemistry · doi:10.1039/d0py01534b · Cited by 74
Zhang, B., Bian, X., Xiang, S., Li, G., & Chen, X. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.11.022 · Cited by 32
Miao, X., Han, R., Tian, J., Ma, Y., Müller, A. J., & Li, Z. (2025) · Angewandte Chemie International Edition · doi:10.1002/anie.202417627 · Cited by 27
Toughening modification of PLLA by combination of copolymerization and in situ reactive blending
Zhang, B., Bian, X., Zhou, D., Feng, L., Li, G., & Chen, X. (2016) · RSC Advances · doi:10.1039/c6ra23267a · Cited by 15
Metadata
- Authors
- Zeng, X., Wu, B., Wu, L., Hu, J., Bu, Z., & Li, B.-G.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-02-24
- Volume
- 53
- Issue
- 9
- Pages
- 3550-3558
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2331115632
- Cited by
- 38
- References
- 5
- FWCI
- 1.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.