The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Selective Transformation of 5-Hydroxymethylfurfural into the Liquid Fuel 2,5-Dimethylfuran over Carbon-Supported Ruthenium
Abstract
A simple and efficient process was presented for the selective hydrogenation of 5-hydroxymethylfurfural (HMF) into the high-quality liquid fuel 2,5-dimethylfuran (DMF) in the presence of tetrahydrofuran (THF). Among the employed metal catalysts, the relatively inexpensive carbon-supported ruthenium (Ru/C) displayed the highest catalytic performance, which led to 94.7% DMF yield with 100% HMF conversion at a relatively mild reaction temperature of 200 °C for only 2 h. Although Ru/C had a little loss in the catalytic activity when it was used for five successive reaction runs, the partially deactivated Ru/C could be easily regenerated by heating at a mixed flow of H 2 and N 2 . Moreover, the plausible mechanism involving an aldehyde group, a hydroxyl group, and a furan ring for the selective hydrogenation of HMF into DMF was also proposed. Subsequently, DMF was separated from the crude hydrogenation mixture according to their various boiling points by the combination of atmospheric distillation and vacuum distillation, and then, the chemical structures and physical properties of the separated DMF were confirmed to be consistent with the authentic DMF. More gratifyingly, Ru/C and THF were also found to be a good combination for the direct hydrogenation of carbohydrate-derived HMF into DMF, which is very important for the practical production of DMF from a variety of biomass-derived carbohydrates such as fructose, glucose, sucrose, maltose, cellobiose, starch, and cellulose.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alvira, P., Tomás-Pejó, E., Ballesteros, M., & Negro, M. J. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2009.11.093 · Cited by 3,912
Cited by
Chen, S., Wojcieszak, R., Dumeignil, F., Marceau, E., & Royer, S. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00134 · Cited by 979
From lignocellulosic biomass to levulinic acid: A review on acid-catalyzed hydrolysis
Kang, S., Fu, J., & Zhang, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.06.016 · Cited by 580
Hu, L., Lin, L., Wu, Z., Zhou, S., & Liu, S. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.02.042 · Cited by 445
Self-citationSynthesis of ethylene glycol and terephthalic acid from biomass for producing PET
Pang, J., Zheng, M., Sun, R., Wang, A., Wang, X., & Zhang, T. (2016) · Green Chemistry · doi:10.1039/c5gc01771h · Cited by 358
The green solvent: a critical perspective
Winterton, N. (2021) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-021-02188-8 · Cited by 307
Metadata
- Authors
- Hu, L., Tang, X., Xu, J., Wu, Z., Lin, L., & Liu, S.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-02-11
- Volume
- 53
- Issue
- 8
- Pages
- 3056-3064
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2316551736
- Cited by
- 162
- References
- 1
- FWCI
- 6.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Selective Transformation of 5-Hydroxymethylfurfural into the Liquid Fuel 2,5-Dimethylfuran over Carbon-Supported Ruthenium. https://app.cochat.ai/papers/10.1021/ie404441a
- The paper
- Hu, L., Tang, X., Xu, J., Wu, Z., Lin, L., & Liu, S. (2014). Selective Transformation of 5-Hydroxymethylfurfural into the Liquid Fuel 2,5-Dimethylfuran over Carbon-Supported Ruthenium. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie404441a
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.