Production of Bio-oil from Alfalfa Stems by Fluidized-Bed Fast Pyrolysis
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
This study focused on the production of bio-oil from alfalfa stem material. Two alfalfa maturity stages, harvested at the early bud and full flower stages of development, were examined to evaluate the impact of variation in cell wall polysaccharide and lignin content on pyrolysis oil yields, production efficiency, and bio-oil and char quality, in terms of their use as combustion fuel and for chemicals. Findings included a lower-than-average yield of bio-oil and a higher-than-average yield of charcoal from alfalfa stems, compared to previous results for other biomass feedstocks. The bio-oil showed a decrease in oxygen content from the alfalfa stems, leading to a higher-than-average energy content in the bio-oil. Bio-oil yields were slightly higher for the more-mature alfalfa, which had higher levels of cell wall cellulose and lignin. Overall, when all the pyrolysis products were considered, energy recovery was better for the more-mature alfalfa stems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils
Diebold, J. P. (1999) · doi:10.2172/753818 · Cited by 549
Dien, B. S., Jung, H.-J. G., Vogel, K. P., Casler, M. D., Lamb, J. F. S., Iten, L., Mitchell, R. B., & Sarath, G. (2006) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2006.02.004 · Cited by 491
Self-citation
Cited by
Microalgae for biodiesel production and other applications: A review
Mata, T. M., Martins, A. A., & Caetano, N. S. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.020 · Cited by 5,685
Characterization of biochar from fast pyrolysis and gasification systems
Brewer, C. E., Schmidt‐Rohr, K., Satrio, J. A., & Brown, R. C. (2009) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.10378 · Cited by 833
Jensen, E. S., Peoples, M. B., Boddey, R. M., Gresshoff, P. M., Hauggaard-Nielsen, H., J.R. Alves, B., & Morrison, M. J. (2012) · Agronomy for Sustainable Development · doi:10.1007/s13593-011-0056-7 · Cited by 779
Bio-oil and bio-char production from corn cobs and stover by fast pyrolysis
Mullen, C. A., Boateng, A. A., Goldberg, N. M., Lima, I. M., Laird, D. A., & Hicks, K. B. (2010) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2009.09.012 · Cited by 717
Self-citationExploring the potential of microalgae for new biotechnology applications and beyond: a review
Rizwan, M., Mujtaba, G., Memon, S. A., Lee, K., & Rashid, N. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.04.034 · Cited by 578
Metadata
- Authors
- Boateng, A. A., Mullen, C. A., Goldberg, N., Hicks, K. B., Jung, H.-J. G., & Lamb, J. F. S.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-05-21
- Volume
- 47
- Issue
- 12
- Pages
- 4115-4122
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1996511489
- Cited by
- 112
- References
- 3
- FWCI
- 5.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.