The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Steel Converter Slag as a Raw Material for Precipitation of Pure Calcium Carbonate
Abstract
In this work we study the possibility of utilizing steel converter slag, a byproduct of steel manufacturing, for production of pure calcium carbonate. The dissolution of calcium from steel converter slag by using acetic acid as a solvent and the precipitation of pure calcium carbonate from the resulting solution were experimentally investigated. It was found that, while strong solutions of acetic acid dissolve most of the calcium from the slag, weak acetic acid solutions dissolve calcium selectively. Precipitation of any substantial amount of calcium carbonate was found to require the addition of sodium hydroxide. Calcium conversion from the solution into the precipitate was as high as 86%, and the purity of the precipitate was over 99%. The calcium carbonate particles produced at low temperatures were found to have rhombohedral particle shapes, a very high brightness (98.7%), and a small particle size (mean value of 0.6 μm).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dissolution of steelmaking slags in acetic acid for precipitated calcium carbonate production
Teir, S., Eloneva, S., Fogelholm, C.-J., & Zevenhoven, R. (2007) · Energy · doi:10.1016/j.energy.2006.06.023 · Cited by 328
Self-citation
Cited by
A review of mineral carbonation technologies to sequester CO 2
Sanna, A., Uibu, M., Caramanna, G., Kuusik, R., & Maroto-Valer, M. M. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00035h · Cited by 1,258
Carbon capture and storage using alkaline industrial wastes
Bobicki, E. R., Liu, Q., Xu, Z., & Zeng, H. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.11.002 · Cited by 666
Pan, S.-Y., Chang, E. E., & Chiang, P.-C. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.06.0149 · Cited by 459
“The carbonate precipitation using steelmaking slag as feedstock should be mainly calcite (CaCO 3 ) (Bonenfant et al. , 2008; Eloneva et al. , 2008a; Costa, 2009; Wang and Yan, 2010; Chang et al. , 2011a, b).”
BackgroundMethodInfluentialChang, R., Kim, S., Lee, S., Choi, S., Kim, M., & Park, Y. (2017) · Frontiers in Energy Research · doi:10.3389/fenrg.2017.00017 · Cited by 345
Accelerated carbonation of brucite in mine tailings for carbon sequestration
Harrison, A. L., Power, I. M., & Dipple, G. M. (2013) · Environmental Science & Technology · doi:10.1021/es3012854 · Cited by 328
Metadata
- Authors
- Eloneva, S., Teir, S., Salminen, J., Fogelholm, C.-J., & Zevenhoven, R.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-08-01
- Volume
- 47
- Issue
- 18
- Pages
- 7104-7111
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W1997473003
- Cited by
- 166
- References
- 1
- FWCI
- 12.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Steel Converter Slag as a Raw Material for Precipitation of Pure Calcium Carbonate. https://app.cochat.ai/papers/10.1021/ie8004034
- The paper
- Eloneva, S., Teir, S., Salminen, J., Fogelholm, C.-J., & Zevenhoven, R. (2008). Steel Converter Slag as a Raw Material for Precipitation of Pure Calcium Carbonate. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/ie8004034
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.