The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Dilute Acid Hydrolysis of Loblolly Pine: A Comprehensive Approach
Abstract
A comprehensive study of the acid hydrolysis of the softwood species, Loblolly pine ( Pinus taeda), using different hydrolysis conditions is presented. The effect of the type of acid, pH, reaction temperature, and reaction time on hydrolysis products such as monosaccharides (mannose, glucose, galactose, xylose, and arabinose) and the subsequent degradation products, 5-hydroxymethyl-2-furaldehyde (HMF) and 2-furaldehyde (furfural) is reported using a batch reactor. Trifluoroacetic acid (TFA) is found to yield the highest amount of overall soluble monosaccharides (∼70% yield from the hemicelluloses fraction) at 150 °C at pH 1.65. The mineral acids (HCl, H 2 SO 4, HNO 3, and H 3 PO 4 ) gave a slightly lower yield of monosaccharides from hydrolyzed hemicellulose (∼60%). At 200 °C, cellulose is hydrolyzed by the mineral acids as evidenced by higher levels of solid dissolution and higher soluble hexose (relative to pentose) yields. Larger amounts of degradation products are also noted at higher temperatures. Furthermore, an increased amount of HMF and furfural is noted in the liquid product as compared to lower temperatures. TFA was found to be the most “gentle” acid, leading to limited monosaccharide degradation among the acids used. The presence of soluble oligosaccharides in solution after hydrolysis was confirmed by applying a secondary acid hydrolysis to the solid-free liquid hydrolysate. Good closure of mass balances was possible using total organic carbon (TOC) analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Features of promising technologies for pretreatment of lignocellulosic biomass
MOSIER, N. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.06.025 · Cited by 6,251
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
US Department of Energy (USDOE), W., Perlack, R., USDOE Office of Energy Efficiency and Renewable Energy (EERE), O. O. S. T. B. T. O. (., Oak Ridge National Laboratory (ORNL), O. R., USDA, Wright, L., Turhollow, A., Graham, R., Stokes, B., & Erbach, D. (2005) · doi:10.2172/1216415 · Cited by 1,327
Hydrothermal processing of lignocellulosic materials
Garrote, G., Domínguez, H., & Parajó, J. C. (1999) · Holz als Roh- und Werkstoff · doi:10.1007/s001070050039 · Cited by 880
Cited by
Recent updates on different methods of pretreatment of lignocellulosic feedstocks: a review
Kumar, A. K., & Sharma, S. (2017) · Bioresources and Bioprocessing · doi:10.1186/s40643-017-0137-9 · Cited by 1,441
Chemical and Physicochemical Pretreatment of Lignocellulosic Biomass: A Review
Brodeur, G., Yau, E., Badal, K., Collier, J., Ramachandran, K. B., & Ramakrishnan, S. (2011) · Enzyme Research · doi:10.4061/2011/787532 · Cited by 1,040
Pu, Y., Hu, F., Huang, F., Davison, B. H., & Ragauskas, A. J. (2013) · Biotechnology for Biofuels · doi:10.1186/1754-6834-6-15 · Cited by 608
Overview of biomass pretreatment for cellulosic ethanol production.
Zheng, Y., Pan, Z., & Zhang, R. (2009) · International journal of agricultural and biological engineering · doi:10.25165/ijabe.v2i3.168 · Cited by 585
Singh, J., Suhag, M., & Dhaka, A. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.10.012 · Cited by 462
Metadata
- Authors
- Marzialetti, T., Valenzuela Olarte, M. B., Sievers, C., Hoskins, T. J. C., Agrawal, P. K., & Jones, C. W.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-08-26
- Volume
- 47
- Issue
- 19
- Pages
- 7131-7140
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2063785563
- Cited by
- 173
- References
- 4
- FWCI
- 6.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.